USCG Engineering General Subjects – Question Bank Book 11 (BK11) — page 23
3080 questions with correct answers from the official USCG question bank (2008 edition), book 11 (Engine – USCG question bank, 2008 edition, Engine officers). Pass mark 70%. Click a question to see its answer.
Take the full practice test →Free USCG practice test with the real pass mark, no sign-up- 2201.When the solenoid valves in a refrigeration system have closed, the compressor will be stopped by the __________.
- 2202.If you have a duplex double acting reciprocating pump making 180 strokes/minute, with a 5" diameter cylinder, a 7" stroke and operating with 98% volumetric efficiency, what is the capacity of this pump?
- 2203.If you have a duplex double acting reciprocating pump making 120 strokes/minute, with a 5" diameter cylinder, a 12" stroke and operating with 92% volumetric efficiency, what is the capacity of this pump?
- 2204.If you have a simplex single acting reciprocating pump making 140 strokes/minute, with a 3" diameter cylinder, a 9" stroke and operating with 94% volumetric efficiency, what is the capacity of this pump?
- 2205.If you have a simplex single acting reciprocating pump making 220 strokes/minute, with a 3" diameter cylinder, a 5" stroke and operating with 87% volumetric efficiency, what is the capacity of this pump?
- 2206.If you have a simplex single acting reciprocating pump making 190 strokes/minute, with a 5" diameter cylinder, a 7" stroke and operating with 75% volumetric efficiency, what is the capacity of this pump?
- 2207.A P-type trap and drain is used __________.
- 2208.If you have a simplex single acting reciprocating pump making 130 strokes/minute, with a 5" diameter cylinder, a 4" stroke and operating with 96% volumetric efficiency, what is the capacity of this pump?
- 2209.If you have a simplex single acting reciprocating pump making 140 strokes/minute, with a 4" diameter cylinder, a 11" stroke and operating with 94% volumetric efficiency, what is the capacity of this pump?
- 2210.The drains of lavatory sinks are fitted with P-type or S-type traps to __________.
- 2211.If you have a duplex single acting reciprocating pump making 140 strokes/minute, with a 5" diameter cylinder, a 6" stroke and operating with 83% volumetric efficiency, what is the capacity of this pump?
- 2212.Refrigerant flow through a thermostatic expansion valve is greatest when the __________.
- 2213.If you have a simplex single acting reciprocating pump making 190 strokes/minute, with a 4" diameter cylinder, a 7" stroke and operating with 75% volumetric efficiency, what is the capacity of this pump?
- 2214.If you have a simplex single acting reciprocating pump making 180 strokes/minute, with a 6" diameter cylinder, a 4" stroke and operating with 85% volumetric efficiency, what is the capacity of this pump?
- 2215.Sewage treatment systems aboard U.S. inspected vessels must be approved by the __________.
- 2216.If you have a simplex single acting reciprocating pump making 150 strokes/minute, with a 7" diameter cylinder, a 12" stroke and operating with 95% volumetric efficiency, what is the capacity of this pump?
- 2217.Prior to making repairs on an evaporator located in a large, multi-box refrigeration system, you should remove the refrigerant by __________.
- 2218.If you have a duplex single acting reciprocating pump making 140 strokes/minute, with a 3" diameter cylinder, a 11" stroke and operating with 94% volumetric efficiency, what is the capacity of this pump?
- 2219.If you have a duplex single acting reciprocating pump making 180 strokes/minute, with a 5" diameter cylinder, a 7" stroke and operating with 98% volumetric efficiency, what is the capacity of this pump?
- 2220.If you have a simplex single acting reciprocating pump making 120 strokes/minute, with a 6" diameter cylinder, a 11" stroke and operating with 83% volumetric efficiency, what is the capacity of this pump?
- 2221.Sacrificial zinc anodes are used on the saltwater side of heat exchangers to __________.
- 2222.If the orifice in the loop seal of a flash evaporator were to become significantly enlarged through erosion, the __________.
- 2223.An automatic solenoid dump valve should be set to trip if the evaporator produces distillate with salt content exceeding __________.
- 2224.If you have a simplex single acting reciprocating pump making 140 strokes/minute, with a 3" diameter cylinder, a 13" stroke and operating with 94% volumetric efficiency, what is the capacity of this pump?
- 2225.In a refrigeration system, air is purged at the __________.
- 2226.If you have a duplex double acting reciprocating pump making 180 strokes/minute, with a 6" diameter cylinder, a 4" stroke and operating with 85% volumetric efficiency, what is the capacity of this pump?
- 2227.If you have a simplex single acting reciprocating pump making 140 strokes/minute, with a 5" diameter cylinder, a 6" stroke and operating with 90% volumetric efficiency, what is the capacity of this pump?
- 2228.If you have a duplex double acting reciprocating pump making 180 strokes/minute, with a 4" diameter cylinder, a 13" stroke and operating with 85% volumetric efficiency, what is the capacity of this pump?
- 2229.If you have a simplex single acting reciprocating pump making 150 strokes/minute, with a 5" diameter cylinder, a 7" stroke and operating with 95% volumetric efficiency, what is the capacity of this pump?
- 2230.Coast Guard Regulations (46 CFR Part 56) for bilge and ballast piping require that __________.
- 2231.If you have a simplex single acting reciprocating pump making 120 strokes/minute, with a 4" diameter cylinder, a 10" stroke and operating with 92% volumetric efficiency, what is the capacity of this pump?
- 2232.The safest and quickest method of adding refrigerant to a refrigeration system is to add the refrigerant through the __________.
- 2233.If you have a simplex single acting reciprocating pump making 140 strokes/minute, with a 4" diameter cylinder, a 13" stroke and operating with 94% volumetric efficiency, what is the capacity of this pump?
- 2234.If you have a duplex double acting reciprocating pump making 250 strokes/minute, with a 4" diameter cylinder, a 7" stroke and operating with 79% volumetric efficiency, what is the capacity of this pump?
- 2235.If you have a duplex double acting reciprocating pump making 330 strokes/minute, with a 3" diameter cylinder, a 4" stroke and operating with 96% volumetric efficiency, what is the capacity of this pump?
- 2236.A solenoid operated distillate bypass valve is installed in the discharge line between a distilling plant and the potable water tanks to prevent __________.
- 2237.If the distillate temperature is 150°F and the distillate salinity is 0.35 grains per gallon, the three-way solenoid trip valve should direct the distillate to the __________.
- 2238.Which of the following statements represents the basic principle of operation of an electrical salinity indicator?
- 2239.In a submerged tube evaporator, the automatic solenoid dump valve will trip if the salinity exceeds __________.
- 2240.The best time to check the oil level in the compressor in a typical refrigeration system is when the compressor is stopped after a long period of running. This is because the __________.
- 2241.In the operation of a two-stage flash-type distilling plant, which of the pumps listed should be vented to the second stage shell in order to remove vapors from the pump suction?
- 2242.If you have a duplex single acting reciprocating pump making 180 strokes/minute, with a 6" diameter cylinder, a 11" stroke and operating with 85% volumetric efficiency, what is the capacity of this pump?
- 2243.If you have a simplex single acting reciprocating pump making 150 strokes/minute, with a 5" diameter cylinder, a 12" stroke and operating with 95% volumetric efficiency, what is the capacity of this pump?
- 2244.The first stage feedwater temperature and shell absolute pressure in a multistage flash evaporator is __________.
- 2245.In a two stage flash evaporator, operating conditions in the second stage, as compared to the first stage, are __________.
- 2246.In a flash evaporator, heated water under pressure is converted into vapor by suddenly __________.
- 2247.Vapor is produced in a flash evaporator by introducing __________.
- 2248.Feedwater supplied to a flash type distilling plant will flash to vapor in the first-stage due to the flash chamber __________.
- 2249.A flash type distilling plant is more efficient than a high pressure evaporator as __________. I. vaporization of the feed water occurs in a vacuum II. boiling of feed water occurs only once on the tube surfaces
- 2250.When one belt of a multiple V-belt compressor drive requires replacement, all of the belts must be replaced, because __________.
- 2251.If you have a duplex single acting reciprocating pump making 180 strokes/minute, with a 5" diameter cylinder, a 13" stroke and operating with 75% volumetric efficiency, what is the capacity of this pump?
- 2252.If you have a simplex single acting reciprocating pump making 160 strokes/minute, with a 3" diameter cylinder, a 4" stroke and operating with 95% volumetric efficiency, what is the capacity of this pump?
- 2253.If you have a duplex single acting reciprocating pump making 140 strokes/minute, with a 4" diameter cylinder, a 11" stroke and operating with 94% volumetric efficiency, what is the capacity of this pump?
- 2254.If you have a simplex single acting reciprocating pump making 110 strokes/minute, with a 4" diameter cylinder, a 6" stroke and operating with 93% volumetric efficiency, what is the capacity of this pump?
- 2255.In a double-effect submerged tube evaporator, the brine density should be prevented from falling below 1.5/32nds to minimize __________.
- 2256.In a double-effect submerged tube evaporator, the brine density should be prevented from falling below 1.5/32nds to minimize __________.
- 2257.In the operation of a two-stage flash type distilling plant, the rate of scale formation is greatly reduced by __________.
- 2258.The rate of scale formation in a flash type distilling plant is greatly reduced by __________.
- 2259.A common secondary refrigerant used in air conditioning systems aboard ship is __________.
- 2260.If you have a simplex single acting reciprocating pump making 190 strokes/minute, with a 3" diameter cylinder, a 13" stroke and operating with 75% volumetric efficiency, what is the capacity of this pump?
- 2261.Scale accumulation on evaporator heating surfaces will cause __________.
- 2262.If you have a duplex single acting reciprocating pump making 150 strokes/minute, with a 7" diameter cylinder, a 12" stroke and operating with 95% volumetric efficiency, what is the capacity of this pump?
- 2263.If the rated distillate production of a submerged tube type evaporator cannot be maintained with the supplied maximum steam flow rate, the evaporator __________.
- 2264.If you have a simplex single acting reciprocating pump making 120 strokes/minute, with a 6" diameter cylinder, a 7" stroke and operating with 92% volumetric efficiency, what is the capacity of this pump?
- 2265.If you have a duplex single acting reciprocating pump making 190 strokes/minute, with a 6" diameter cylinder, a 4" stroke and operating with 88% volumetric efficiency, what is the capacity of this pump?
- 2266.When any low pressure distilling plant is operated at less than the designed vacuum, the __________.
- 2267.If you have a simplex single acting reciprocating pump making 190 strokes/minute, with a 5" diameter cylinder, a 10" stroke and operating with 87% volumetric efficiency, what is the capacity of this pump?
- 2268.If you have a simplex single acting reciprocating pump making 150 strokes/minute, with a 5" diameter cylinder, a 11" stroke and operating with 85% volumetric efficiency, what is the capacity of this pump?
- 2269.If you have a simplex single acting reciprocating pump making 160 strokes/minute, with a 4" diameter cylinder, a 11" stroke and operating with 90% volumetric efficiency, what is the capacity of this pump?
- 2270.If you have a duplex single acting reciprocating pump making 140 strokes/minute, with a 3" diameter cylinder, a 13" stroke and operating with 94% volumetric efficiency, what is the capacity of this pump?
- 2271.An excessively high brine level in a flash evaporator can be caused by __________.
- 2272.If you have a duplex double acting reciprocating pump making 120 strokes/minute, with a 4" diameter cylinder, a 7" stroke and operating with 83% volumetric efficiency, what is the capacity of this pump?
- 2273.If you have a simplex single acting reciprocating pump making 120 strokes/minute, with a 6" diameter cylinder, a 5" stroke and operating with 92% volumetric efficiency, what is the capacity of this pump?
- 2274.If you have a simplex single acting reciprocating pump making 230 strokes/minute, with a 4" diameter cylinder, a 7" stroke and operating with 78% volumetric efficiency, what is the capacity of this pump?
- 2275.If you have a simplex single acting reciprocating pump making 170 strokes/minute, with a 4" diameter cylinder, a 11" stroke and operating with 89% volumetric efficiency, what is the capacity of this pump?
- 2276.If you have a simplex single acting reciprocating pump making 180 strokes/minute, with a 6" diameter cylinder, a 10" stroke and operating with 85% volumetric efficiency, what is the capacity of this pump?
- 2277.In a shell-and-tube type heat exchanger, the most common cause of decreased performance is __________.
- 2278.If you have a duplex double acting reciprocating pump making 170 strokes/minute, with a 8" diameter cylinder, a 13" stroke and operating with 89% volumetric efficiency, what is the capacity of this pump?
- 2279.Demulsibility of lube oil is defined as __________.
- 2280.If you have a duplex single acting reciprocating pump making 140 strokes/minute, with a 6" diameter cylinder, a 14" stroke and operating with 94% volumetric efficiency, what is the capacity of this pump?
- 2281.In a refrigeration system, the thermal expansion valve sensing bulb is located __________.
- 2282.Some of the hazards of working with electric power tools may be avoided if the operator insures that __________.
- 2283.If you have a duplex double acting reciprocating pump making 190 strokes/minute, with a 5" diameter cylinder, a 7" stroke and operating with 75% volumetric efficiency, what is the capacity of this pump?
- 2284.If a bolt or stud were to break off flush at the surface, which of the listed actions would probably be the best first step to begin the process of its removal?
- 2285.If you have a simplex single acting reciprocating pump making 180 strokes/minute, with a 4" diameter cylinder, a 9" stroke and operating with 89% volumetric efficiency, what is the capacity of this pump?
- 2286.When using a portable droplight, you should always insure that __________.
- 2287.To properly use a lathe crotch center to drill an oil hole in a bushing, you would mount the crotch center in the __________.
- 2288.If you have a simplex single acting reciprocating pump making 120 strokes/minute, with a 6" diameter cylinder, a 4" stroke and operating with 92% volumetric efficiency, what is the capacity of this pump?
- 2289.When machining a long piece of work between centers, you must __________.
- 2290.If you have a duplex single acting reciprocating pump making 140 strokes/minute, with a 4" diameter cylinder, a 13" stroke and operating with 94% volumetric efficiency, what is the capacity of this pump?
- 2291.In a direct expansion refrigeration evaporator, the coils are __________.
- 2292.To ensure the stock is running true in a lathe, you should use a __________.
- 2293.If you have a simplex single acting reciprocating pump making 180 strokes/minute, with a 6" diameter cylinder, a 5" stroke and operating with 98% volumetric efficiency, what is the capacity of this pump?
- 2294.If you have a duplex double acting reciprocating pump making 190 strokes/minute, with a 5" diameter cylinder, a 11" stroke and operating with 90% volumetric efficiency, what is the capacity of this pump?
- 2295.If you have a simplex single acting reciprocating pump making 160 strokes/minute, with a 6" diameter cylinder, a 9" stroke and operating with 85% volumetric efficiency, what is the capacity of this pump?
- 2296.When using a wheel dressing tool to true up a grinding wheel, you should always __________.
- 2297.The operation of machining a uniformly roughened or checked surface on round stock in a lathe is called __________.
- 2298.If you have a simplex single acting reciprocating pump making 140 strokes/minute, with a 4" diameter cylinder, a 8" stroke and operating with 92% volumetric efficiency, what is the capacity of this pump?
- 2299.A device used to hold open the refrigeration compressor suction valve during starting is called a __________.
- 2300.If the point angle of a drill is less than 59°, the __________.