USCG Deck Safety – Question Bank Book 4 (BK4) — page 47
4852 questions with correct answers from the official USCG question bank (2008 edition), book 4. Pass mark 70%. Click a question to see its answer.
Take the full practice test →Free USCG practice test with the real pass mark, no sign-up- 4601.Life floats must be equipped with __________. (small passenger vessel regulations)
- 4602.The DEEP DRILLER, at 58.0 feet draft in sea water, discharges 200 long tons. What is the new draft?
- 4603.While in transit at a draft of 20.5 feet, the DEEP DRILLER has a KGT of 65.00 feet. What is the GMT?
- 4604.The DEEP DRILLER, at 58.0 feet draft in sea water, discharges 200 long tons. What is the new displacement?
- 4605.The DEEP DRILLER, at 58.0 feet draft in sea water, loads 200 long tons. What is the new displacement?
- 4606.What are the transverse moments for the contents of P-tank #1 of the DEEP DRILLER if the ullage is 2.3 feet?
- 4607.The DEEP DRILLER is loaded as shown in Sample Load Form #4 (Drilling). While the unit is deballasting, starboard valve 19 fails in the closed position. You may deballast from tank 9S by pumping from tank 8S by opening valves 20 and __________.
- 4608.The DEEP DRILLER is loaded as shown in Sample Load Form #5 (Survival). While the unit is deballasting, port valve 5 fails in the closed position. You may deballast from tank 2P by pumping from tank 1P after opening valves 6 and __________.
- 4609.The DEEP DRILLER is loaded as shown in Sample Load Form #5 (Survival). While the unit is deballasting, starboard valve 5 fails in the closed position. You may deballast from tank 2S by pumping from tank 1S after opening valves 6 and __________.
- 4610.The DEEP DRILLER is loaded as shown in Sample Load Form #4 (Drilling). If port valves 24 and 2 are mistakenly opened, the change in inclination will be increasing trim by the __________.
- 4611.Starboard ballast pump #1 on the DEEP DRILLER has failed. If you want to deballast from the forward-starboard column using starboard pump #2, it is necessary to open valves __________.
- 4612.Jettisoning weight from topside __________.
- 4613.Port ballast pump #1 on the DEEP DRILLER has failed. If you want to deballast the forward-port column using port ballast pump #2, it is necessary to open valves __________.
- 4614.Starboard ballast pump #1 on the DEEP DRILLER has failed. To deballast from tank C2SA using starboard ballast pump #2, it is necessary to open the manual valve and which motor driven valves?
- 4615.The DEEP DRILLER, at 60.0 feet draft in sea water, has VM = 974,441 foot-long tons, LM = 40,301 foot-long tons, TM = 3 foot-long tons, FSML = 30,572 foot-long tons, and FSMT = 18,732 foot-long tons. What is the uncorrected height of the center of gravity?
- 4616.The DEEP DRILLER, at 60.0 feet draft in sea water, has VM = 974,441 foot-long tons, LM = 3 foot-long tons, FSML = 30,572 foot-long tons, and FSMT = 18,732 foot-long tons. What is the transverse free surface correction to KG?
- 4617.The DEEP DRILLER, at 60.0 feet draft in sea water, has VM = 974,441 foot-long tons, LM = 40,301 foot-long tons, TM = 3 foot-long tons, FSML = 30,572 foot-long tons, and FSMT = 18,732 foot-long tons, and FSMT = 18,732 foot-long tons. What is the LCG?
- 4618.The DEEP DRILLER, at 60.0 feet draft in sea water, has VM = 974,441 foot-long tons, LM = 40,301 foot-long tons, TM = 3 foot-long tons, FSML = 30,572 foot-long tons, and FSMT = 18,732 foot-long tons. What is the longitudinal free surface correction to KG?
- 4619.The DEEP DRILLER, at 60.0 feet draft in sea water, has VM = 974,441 foot-long tons, LM = 40,301 foot-long tons, TM = 3 foot-long tons, FSML = 30,572 foot-long tons, and FSMT = 18,732 foot-long tons. What is TCG?
- 4620.All personnel should be familiar with the lifeboats __________.
- 4621.The DEEP DRILLER is loaded as shown in Sample Load Form #4 (Drilling). What would be the new sum of FSML for Fresh Water if the entire contents of Drill Water Tank #5P are transferred to Tank #5S?
- 4622.If a severe storm threatens the COASTAL DRILLER while elevated, the setback in the derrick should be lowered and placed in the pipe rack. Its weight should be accounted for as __________.
- 4623.When threatened with a severe storm while operating in 250 feet of water, the COASTAL DRILLER should be placed at an air gap of __________.
- 4624.The maximum weight for the COASTAL DRILLER in severe storm conditions is __________.
- 4625.While elevated, the COASTAL DRILLER prepares for a severe storm. When the setback is lowered and placed in the pipe racks, it is considered as part of the __________.
- 4626.The full period of motion of the DEEP DRILLER while tripping is 7 seconds and the maximum pitch angle as seen on the inclinometers is 4°. From the standpoint of critical motion, the motion is __________.
- 4627.After deploying the anchor, a permanent chain chaser is __________.
- 4628.In securing deck loads for an ocean tow, drill pipe should be __________.
- 4629.Hydrogen sulfide in explosive concentrations has been detected on the drill floor. The abandon rig signal has been sounded. To evacuate the rig, the crew should use __________.
- 4630.The muster list shows each rig hand's muster station, his duties during abandonment, basic instructions, and __________.
- 4631.While drilling loaded as shown in Sample Load Form #4 (Drilling), the DEEP DRILLER suffers a sudden unexpected forward inclination. The wind and waves are light from the starboard bow. Among the possible causes, you should consider __________.
- 4632.On a MODU, an obvious indicator of lost circulation of drilling fluid is __________.
- 4633.To determine the number of certificated Lifeboatmen required on a mobile offshore drilling unit, you should check the __________.
- 4634.Control of fire should be addressed __________.
- 4635.When using a hand held smoke signal aboard a survival craft, you should activate the signal __________.
- 4636.While drilling loaded as shown in Sample Load Form #4 (Drilling), the DEEP DRILLER suffers a sudden unexpected inclination to port and aft. Strong winds and high waves are from the starboard bow. Among the possible causes, you should consider __________.
- 4637.The prohibition against displaying lights which may be confused with required navigation lights applies __________.
- 4638.A jack-up has 8 inches of trim by the stern. Calculations show that the moment required to change trim one inch (MCT1") is 500 foot-kips. To level the unit, how far must a weight of 50 kips be transferred toward the bow?
- 4639.A jack-up is trimmed six inches by the bow. The moment required to change trim one inch (MCT1") is 1200 foot-kips. Transferring 200 kips of drill water from a tank with an LCG of 20 feet to a tank with an LCG of 140 feet results in a final trim of __________.
- 4640.The draft at the forward draft mark of a jack-up is 11 feet 3 inches while the draft at the aft draft mark is 12 feet 9 inches. The value of trim is __________.
- 4641.A jack-up, while level in transit at 10 feet draft, experiences a wind gust which results in a starboard draft of 11 feet 6 inches. What is the heel?
- 4642.A jack-up, while level in transit at 10 feet draft, experiences a wind gust which results in a port draft of 11 feet. What is the heel?
- 4643.A jack-up, while level in transit at 10 feet draft, experiences a wind gust which results in a port draft of 11 feet. What is the new starboard draft?
- 4644.A jack-up level at 12.5 feet draft transfers 100 kips of drill water from a tank with a TCG of -30 feet to a starboard tank with a TCG of 70 feet. The resulting starboard draft is 13 feet. The moment required to change list one inch (MCL1") is __________.
- 4645.A jack-up with a calculated moment to change list one inch (MCL1") of 1,350 foot-kips intends to transfer drill water from a tank with a TCG of 82 feet to a tank with a TCG of 18 feet. How much weight should be transferred to change the draft on the port side from 11.0 to 11.5 feet?
- 4646.A jack-up with a calculated moment to change list one inch (MCL1") of 1,200 foot-kips intends to transfer 100 kips of weight in a transverse direction. How far should the weight be transferred to change the draft on the port side from 11.5 to 11.0 feet?
- 4647.A semisubmersible in transit is at a draft of 19 feet. The depth of the lower hulls is 21 feet. How much bunker fuel at 54.0 lbs/cu ft could be taken on and still provide one foot of freeboard if the TPI is 52.3?
- 4648.When giving first aid, you should understand how to conduct primary and secondary surveys and know __________.
- 4649.If a victim is unconscious, you should first look for evidence of __________.
- 4650.In a semisubmersible MODU, the columns contain void spaces above the waterline that used principally for __________.
- 4651.The DEEP DRILLER is loaded as shown in Sample Load Form #4 (Drilling). While the unit is deballasting, starboard valve 17 fails in the closed position. You may deballast from tank 8S by pumping from tank 9S and opening valves 18 and __________.
- 4652.The DEEP DRILLER is loaded as shown in Sample Load Form #4. While the unit is deballasting, port valve 5 fails in the closed position. You may deballast from tank 2P by pumping from tank 9P by also opening valves 6 and __________.
- 4653.A vessel behaves as if all of its weight is acting downward through the center of gravity, and all its support is acting upward through the __________.
- 4654.On the COASTAL DRILLER, placing the rotary 34 feet aft of the transom and two feet to starboard of the centerline, limits the maximum hook load to __________.
- 4655.The change in weight (measured in tons) which causes a draft change of one inch is __________.
- 4656.For a floating vessel, the result of subtracting KG from KM is the __________.
- 4657.The important stability parameter, KG, is defined as the __________.
- 4658.The important initial stability parameter, GM, is the __________.
- 4659.The time required to incline from port to starboard and back to port again is called __________.
- 4660.The time required to incline from bow down to stern down and return to bow down again is called __________.
- 4661.The tendency of a vessel to return to its original trim after being inclined by an external force is __________.
- 4662.The enclosed area defined as the intersection of the surface of the water and the hull of a vessel is the __________.
- 4663.The waterplane area is described as the intersection of the surface of the water in which a vessel floats and the __________.
- 4664.Two types of anchor shackles which are currently available are __________.
- 4665.Aboard a vessel, multiplying a load's weight by the distance of the load's center of gravity from the centerline results in the load's __________.
- 4666.The difference between the starboard and port drafts caused by shifting a weight transversely is __________.
- 4667.On all mobile offshore drilling units, the deckhead of each accommodation space must be located above __________.
- 4668.Aboard a vessel, dividing the sum of the longitudinal moments by the total weight yields the vessel's __________.
- 4669.The TCG of a vessel may be found by dividing the displacement of the vessel into the __________.
- 4670.No outlet on a fire hydrant may point above the horizontal in order to __________.
- 4671.The outlet at a fire hydrant may be positioned anywhere from horizontal to pointing __________.
- 4672.In addition to weighing the cartridge, which other maintenance is required for a cartridge-operated dry chemical extinguisher?
- 4673.When must a dry chemical fire extinguisher be recharged?
- 4674.Recharging a previously used cartridge-operated dry-chemical extinguisher is accomplished by __________.
- 4675.Each ventilation system for an enclosed classified location on a MODU must provide a complete change of air every __________.
- 4676.The amount of Halon remaining in an extinguisher is determined by __________.
- 4677.Inspection of a Halon extinguisher involves checking the hose, handle, nozzle, and __________.
- 4678.After using a Halon extinguisher, it should be __________.
- 4679.An airplane should NOT send which signal in reply to a surface craft?
- 4680.The blocking or absence of fire dampers can cause __________.
- 4681.Automatic fire dampers in ventilation systems are operated by a __________.
- 4682.Fighting a fire in the galley poses the additional threat of __________.
- 4683.The two factors which make underwater hull repair of a MODU difficult are accessibility and the __________.
- 4684.In plugging submerged holes on a MODU, rags, wedges, and other materials should be used in conjunction with plugs to __________.
- 4685.The external flotation bladder of an immersion suit should be inflated __________.
- 4686.The external flotation bladder on an immersion suit should be inflated __________.
- 4687.After abandoning a vessel, water that is consumed within the first 24 hours will __________.
- 4688.The locker or space containing the self-contained breathing apparatus must be __________.
- 4689.When using the rain water collection tubes on a liferaft, the first collection should be __________.
- 4690.When you are firing a pyrotechnic distress signal, it should be aimed __________.
- 4691.Apparent wind speed blowing across a MODU under tow can be measured by a(n) __________.
- 4692.The longitudinal free surface correction of a floating MODU displacing 12,000 kips is 1.20 feet. What would be the new FSCL if 2,400 kips of solid variable loads are added?
- 4693.The transverse free surface correction of a floating MODU displacing 24,000 long tons is 1.0 foot. When the MODU is deballasted by discharging 8,000 long tons of ballast, the FSMT decreases by 4,000 ft-long tons. What is the new FSCT?
- 4694.A ballast tank in a floating MODU has a maximum FSML of 7,000 ft-long tons. If the tank is converted to drill water storage, what would be the new maximum FSML?
- 4695.The longitudinal free surface moments of a drilling mud pit aboard a MODU displacing 24,000 long tons in sea water is 1,200 ft-long tons. If the sounding level in the mud pit is reduced from 8 to 6 feet and the mud weight increases from 10 to 12 lbs/gallon, what is the new FSML for the mud pit?
- 4696.A MODU floating in sea water while displacing 20,000 long tons has transverse free surface moments of 7,500 ft-long tons and longitudinal free surface moments of 10,000 ft-long tons. The maximum virtual rise in the height of the center of gravity due to free surfaces is __________.
- 4697.The object of plugging holes below the waterline on a MODU should be to __________.
- 4698.What type of test determines the pressure at which the formation immediately below the last set casing will take fluid?
- 4699.For well control, the American Petroleum Institute recommends that hydraulic units have sufficient horsepower to close the annular preventer in __________.
- 4700.At the instant when a string of casing being run from a MODU is landed in the well head, __________.