USCG Deck Safety – Question Bank Book 4 (BK4) — page 40
4852 questions with correct answers from the official USCG question bank (2008 edition), book 4. Pass mark 70%. Click a question to see its answer.
Take the full practice test →Free USCG practice test with the real pass mark, no sign-up- 3901.What does the proof test load of an anchor chain demonstrate?
- 3902.With adaptor blocks/chocks in place on an LWT stock anchor, the trip angle will be __________.
- 3903.With adaptor blocks/chocks removed from an LWT stock anchor, the trip angle will be __________.
- 3904.Connecting elements of a mooring system should be fabricated from __________.
- 3905.What effect is achieved from soaking an anchor?
- 3906.On a vessel of 7000 tons displacement, a tank 35 ft. long, 30 ft. wide and 46 ft. deep is half filled with liquid cargo (S.G. 0.923) while the vessel is floating in saltwater (S.G. 1.026). What is the free surface constant for this tank?
- 3907.Why should you soak an anchor?
- 3908.What is the "holding power ratio" of an anchor?
- 3909.What happens ns to the efficiency of an anchor when it is moved from sand to mud?
- 3910.When a combination chain and wire rope mooring line is used, the chain is deployed __________.
- 3911.In a combination chain and wire rope mooring system, the chain is deployed at the anchor end of the line to __________.
- 3912.Anchor shackles should have a breaking strength that is __________.
- 3913.The angle between the flukes and the shank of an anchor is called the __________.
- 3914.The fluke angle of an anchor system is the angle between the __________.
- 3915.The holding power of an anchor is the __________.
- 3916.What line receives the hardest service in the mooring system?
- 3917.Most large anchors are manufactured with a __________.
- 3918.What is the bow type anchor shackle primarily used for?
- 3919.What is the most important difference between the bow type anchor shackle and the D-type anchor shackle?
- 3920.You are tending the lifeline of a man who entered a compartment using a breathing apparatus. How many tugs on the lifeline indicate the man should back out?
- 3921.Which two components pass through the shank of an LWT anchor?
- 3922.To develop maximum anchor holding power, the optimum angle between the anchor's shank and the mooring lines is __________.
- 3923.Increasing the area of the anchor flukes will __________.
- 3924.What is the advantage of a single streamlined fluke anchor over a double fluked anchor of similar weight?
- 3925.Cable tension for catenary calculations is taken at the __________.
- 3926.Your drafts are: FWD 17'-09", AFT 21'-01". Use the blue pages of the Stability Data Reference Book to determine the location of the center of flotation relative to amidships.
- 3927.What is the primary disadvantage of a permanent chain chaser system?
- 3928.The major cause of anchor buoy pendant wire failures is __________.
- 3929.An anchor winch should be equipped with mechanical brakes capable of holding __________.
- 3930.A chain stripper is used to __________.
- 3931.Your semisubmersible drilling unit is moving onto a location in shallow water with a very hard bottom. What is the most effective means of maintaining your position at this location during severe weather?
- 3932.The full period of motion of the DEEP DRILLER while in transit is 7 seconds and the maximum pitch angle as seen on the inclinometers is 4 degrees. From the standpoint of critical motion, the motion is __________.
- 3933.The full period of motion of the DEEP DRILLER while tripping is 10 seconds and the maximum pitch angle as seen on the inclinometer is 4 degrees. From the standpoint of critical motion, the motion is __________.
- 3934.The full period of motion of the DEEP DRILLER while tripping is 8 seconds and the maximum pitch angle as seen on the inclinometers is 4 degrees. From the standpoint of critical motion, the motion is __________.
- 3935.Structural stress levels in a MODU are the sum of loading stresses and stresses due to __________.
- 3936.You are tending the lifeline of a man who entered a tank using a breathing apparatus. How many tugs on the lifeline indicate that the man should come out immediately?
- 3937.Structural stress on a MODU can be reduced by __________.
- 3938.The full period of motion of the DEEP DRILLER while tripping is 10 seconds and the maximum pitch angle as seen on the inclinometers is 8 degrees. From the standpoint of critical motion, the motion is __________.
- 3939.For a semisubmersible moored in heavy weather conditions, the leeward lines should be paid out, and the windward lines adjusted so that __________.
- 3940.For a semisubmersible moored in heavy weather conditions, the weather lines should be adjusted so that several lines carry about the same tension, and the leeward lines are __________.
- 3941.In deballasting to survival draft because of extreme wind and wave loads, thrusters or propulsion, if available, should be used to __________.
- 3942.In ballasting to survival draft, while in transit, due to extreme wind and wave loads, thrusters or propulsion, if available, should be used to __________.
- 3943.While in transit during heavy weather, the crew aboard a semisubmersible should be alert to repeated pounding of waves on the lower bracing. If necessary, the unit should be __________.
- 3944.When evacuating the DEEP DRILLER, preparations should include __________.
- 3945.You are operating an ocean-going vessel of 322 gross tons. If your vessel does NOT have an oily-water separator then she must have a fixed piping system to discharge oily ballast to a shore facility. This system must include __________.
- 3946.On a semisubmersible drilling unit, increasing riser tension reduces __________.
- 3947.On a semisubmersible drilling unit, increasing riser tension increases __________.
- 3948.The hydrostatic release on the inflatable liferafts on a fishing vessel must be __________.
- 3949.On a semisubmersible drilling unit, decreasing riser tension reduces __________.
- 3950.On a semisubmersible drilling unit, decreasing riser tension increases __________.
- 3951.When the air temperature is just below 32°F, snow FIRST adheres to __________.
- 3952.When clear ice is present while drilling, the vertical transverse moments of the DEEP DRILLER are increased by __________.
- 3953.When clear ice is present when the DEEP DRILLER is in transit, the vertical moments are increased by __________.
- 3954.Your drafts are: FWD 16'-02", AFT 18'-02". Use the blue pages of the Stability Data Reference Book to determine the MT1.
- 3955.When assuming the maximum ice weight accumulation on the DEEP DRILLER at survival draft, the vertical moments are increased by __________.
- 3956.The DEEP DRILLER may remain at operating draft instead of deballasting to survival draft when __________.
- 3957.The DEEP DRILLER may remain at operating draft instead of deballasting to survival draft when __________.
- 3958.The DEEP DRILLER may remain at operating draft instead of deballasting to survival draft when __________.
- 3959.You should consider placing the drilling operations of the DEEP DRILLER in standby when __________.
- 3960.In a storm, the windward lines of a MODU's mooring system provide __________.
- 3961.In a storm, the leeward lines of a MODU's mooring system will __________.
- 3962.What is the meaning of the signal QU RQ when sent by the International Code of Signals?
- 3963.The DEEP DRILLER is loaded as shown in Sample Load Form #4, (Drilling). In preparing for approaching heavy weather, the four leeward mooring lines are slacked. These actions reduce the __________.
- 3964.The motion that can significantly increase mooring line tension is __________.
- 3965.The vessel motion that can significantly affect mooring line tensions on a MODU is __________.
- 3966.The design of a spring buoy helps __________.
- 3967.A mooring system that results in a spread system without anchor buoys is called a __________.
- 3968.On a vessel of 6500 tons displacement, a tank 30 ft. long, 32 ft. wide and 18 ft. deep is half filled with liquid cargo (S.G. 1.048) while the vessel is floating in saltwater (S.G. 1.026). What is the free surface constant for this tank?
- 3969.Installing tandem anchors on the same mooring line is referred to as __________.
- 3970.What pressure must a spring buoy, moored at a 500 foot depth, withstand?
- 3971.What can cause a lack of oxygen in a chain locker?
- 3972.Deficient oxygen content inside a chain locker can be detected with __________.
- 3973.Your drafts are: FWD 21'-03", AFT 26'-00". What is the KM based on the tables in the blue pages of the Stability Data Reference Book?
- 3974.Given the same water depth and line tension, the catenary length of a 90 pound/foot mooring chain in comparison to the catenary length of a 19 pound/foot wire rope mooring line will be __________.
- 3975.Given the same water depth and line tension, the length of the ground cable of a 90 pound/foot mooring chain compared to the length of the ground cable of a 19 pound/ft wire rope mooring line will be __________.
- 3976.Given the same water depth and line tension, the catenary length of a 19 pound/foot wire rope mooring line in comparison to the catenary length of a 90 pound/foot mooring chain will be __________.
- 3977.Given the same water depth and mooring tension, the length of the ground cable of a 19 pound/foot wire rope mooring line in comparison to a 90 pound/foot mooring chain will be __________.
- 3978.Given the same water depth and mooring tension, the holding power of a 90 pound/foot chain mooring system in comparison to the holding power of a 19 pound/foot wire rope mooring line will be __________.
- 3979.Given the same water depth and line tension, the holding power of a 19 pound/foot wire rope mooring system in comparison to the holding power of a 90 pound/foot chain mooring system will be __________.
- 3980.A device commonly used to secure the pendant wire when it is initially passed to an anchor handling vessel is __________.
- 3981.The safest device used to secure the end of the pendant wire when it is initially passed to the anchor handling vessel is a __________.
- 3982.If the water depth is 500 feet, the length of the pendant wire from the anchor to the buoy is typically __________.
- 3983.When piggybacking anchors, the distance between the primary anchor and the secondary anchor is determined by __________.
- 3984.The length of chain between the anchor and the end of the pendant line is called the __________.
- 3985.Why are symmetric mooring patterns frequently used to keep MODU's on station?
- 3986.Your drafts are: FWD 21'-03", AFT 21'-09". What is the KM based on the tables in the blue pages of the Stability Data Reference Book?
- 3987.What determines the minimum size of an anchor buoy?
- 3988.What is the purpose of a chain stopper?
- 3989.Air gap is the vertical distance between the bottom of the hull and the __________.
- 3990.A shepherd's crook is used to __________.
- 3991.A J-chaser is used to __________.
- 3992.In storm conditions, with the wind and waves from the port bow of the DEEP DRILLER in 600 feet water depth, the tensions in mooring line 1 and 2 are 400 kips. Completely slacking the mooring lines 5 and 6 reduces the tension in mooring lines 1 and 2 to about __________.
- 3993.In storm conditions in 600 feet of water, completely slacking the leeward mooring line of the DEEP DRILLER reduces the tension in that line to about __________.
- 3994.In storm conditions, with the wind and waves from the port bow of the DEEP DRILLER in 600 feet water depth, the offset is 9%. Completely slacking mooring lines 5 and 6 reduces the offset to __________.
- 3995.In storm conditions, with the wind and waves from the starboard bow of the DEEP DRILLER in 600 feet water depth, the offset is 8%. Completely slacking mooring lines 7 and 8 reduces the offset to __________.
- 3996.In storm conditions, with the wind and waves from the port bow of the DEEP DRILLER in 400 feet water depth, the tensions in mooring lines 1 and 2 are 400 kips. Completely slacking the mooring lines 5 and 6 reduces the tension in mooring lines 1 and 2 to about __________.
- 3997.In storm conditions, with the wind and waves from the starboard bow of the DEEP DRILLER in 400 feet water depth, the offset is 7%. Completely slacking mooring lines 7 and 8 reduces the offset to __________.
- 3998.What is the length of the catenary when the DEEP DRILLER is anchored in 600 feet of water and the anchor line tension is 170 kips?
- 3999.A permanent chain chasing system is used to __________.
- 4000.Damage stability is the stability __________.