USCG Deck Safety – Question Bank Book 4 (BK4) — page 46
4852 questions with correct answers from the official USCG question bank (2008 edition), book 4. Pass mark 70%. Click a question to see its answer.
Take the full practice test →Free USCG practice test with the real pass mark, no sign-up- 4501.What power source actuates a solenoid valve?
- 4502.What quality of a diesel fuel is most significant for efficient combustion?
- 4503.What is the principle behind dynamic braking as used on an anchor windlass?
- 4504.What is the effect of heated intake air on a diesel engine?
- 4505.Lubricating oil should be changed on a heavy duty diesel engine when __________.
- 4506.How would the exhaust of a properly operating diesel engine appear?
- 4507.Each cylinder in a two stroke cycle engine experiences combustion __________.
- 4508.How does combustion air enter the cylinder of a two-cycle diesel engine?
- 4509.Maintaining good working order of fuel pumps and injectors in auxiliary diesel engines requires the use of __________.
- 4510.What factor is essential to the proper operation of a radiator cooled engine?
- 4511.What are the three basic types of engine starters?
- 4512.What does a pyrometer measure on a diesel engine?
- 4513.What condition will result in the automatic shutdown of a diesel engine?
- 4514.On a MODU, the possibility of a blowout makes which type of diesel engine shutdown desirable?
- 4515.What monitoring device best indicates the load being carried by a diesel engine?
- 4516.You are preparing for what promises to be a rough ocean passage. Your 120-foot schooner carries a yard on the foremast about 50 feet above the water. The yard weighs about 1000 pounds. If you take the yard down and stow it on deck for the trip, you will __________.
- 4517.Diesel engines obtain combustion air through turbo chargers, blowers, or __________.
- 4518.What is the purpose of the intake/exhaust valves in a diesel engine?
- 4519.What is the best indication of the loading of a diesel engine?
- 4520.What is the most probable cause of reduced capacity in a reciprocating air compressor?
- 4521.The most serious effect of oxygen retained in a diesel engine jacket water cooling system is that it __________.
- 4522.If you are unable to stop a diesel engine by any other means, you should __________.
- 4523.What is one effect of running a diesel engine at too cool a temperature?
- 4524.When abandoning ship and jumping into the water from a substantial height, you should __________.
- 4525.The three conditions which cause engine shutdown are overspeed, low lube oil pressure, and __________.
- 4526.Sudden unloading of a diesel engine can cause __________.
- 4527.If an engine shuts down due to high jacket water temperature, what action should be taken?
- 4528.The International Oil Pollution Prevention (IOPP) Certificate required by MARPOL is issued to U.S. flag MODUs by the __________.
- 4529.The International Oil Pollution Prevention Certificate on a MODU is valid for a period of __________.
- 4530.A MODU which is required to carry an Oil Record Book must log in the book __________.
- 4531.A MODU required to carry an Oil Record Book must maintain the book on board for __________.
- 4532.Addition of weight above the center of gravity of a vessel will ALWAYS __________.
- 4533.The regulations regarding Oil Record Books do not apply to MODU's that __________.
- 4534.The requirement to carry an Oil Record Book does not apply to a MODU that __________.
- 4535.Under the regulations implementing MARPOL, a mobile offshore drilling unit is required to have an International Oil Pollution Prevention (IOPP) Certificate when the unit __________.
- 4536.Where is thicker plating usually found in the construction of integral tanks on a MODU?
- 4537.You are on a semisubmersible being towed and are concerned that a fishing vessel is not taking sufficient action to avoid you. To signal your concern, you should __________.
- 4538.A jack-up 180 feet in length with the LCF at 120 feet AF0 has a true mean draft (draft at LCF) of 10 feet. If the trim is 3 feet by the stern, what is the draft at the stern?
- 4539.A jack-up 180 feet in length with the LCF at 120 feet AFO has a true mean draft (draft at LCF) of 10 feet. If the trim is 3 feet by the stern, what is the draft at the stern?
- 4540.The DEEP DRILLER, at a draft of 60 feet, has a KGL of 55.4 feet and an LCG of 2.43 feet. What is the trim angle?
- 4541.The DEEP DRILLER, at a draft of 19 feet, has a KGL of 59.91 feet and an LCG of 1.57 feet. What is the trim angle?
- 4542.The DEEP DRILLER, at a draft of 50 feet, has a KGT of 52.12 feet and TCG of 0.5 foot to port of the longitudinal centerline. What is the list in feet?
- 4543.What is the value of KML for the DEEP DRILLER at a draft of 60 feet?
- 4544.An elevated jack-up weighs 17,000 kips. Its center of gravity is located 110 feet aft of frame zero (AF0). What would be the new LCG if the cantilever (weight 900 kips) and drill floor (weight 800 kips) were skidded 70 feet aft?
- 4545.An elevated jack-up weighs 14,000 kips. Its TCG is located 1.0 foot to port of the centerline. What would be the new TCG for the jack-up if the drill floor, weighing 700 kips, is skidded 10 feet to starboard?
- 4546.While preparing for a storm when elevated, the total weight of the COASTAL DRILLER is 14,150 kips, LM are 1,712,150 ft-kips, and TM are -9,905 ft-kips. The starboard leg reaction is __________.
- 4547.While preparing for a storm when elevated, the total weight of the COASTAL DRILLER is 14,150 kips. LM are 1,712,150 ft-kips, and TM are -9,905 ft-kips. The port leg reaction is __________.
- 4548.The COASTAL DRILLER, while drilling, has a total weight of 15,435 kips. The LM are 1,975,680 ft-kips and the TM are -15,435 ft-kips. What is the bow leg reaction?
- 4549.The COASTAL DRILLER, while drilling has a total weight of 15,435 kips. The LM are 1,975,680 ft-kips and the TM are -15,435 ft-kips. What is the starboard leg reaction?
- 4550.The COASTAL DRILLER, while drilling, has a total weight of 15,435 kips. The LM are 1,975,680 ft-kips and the TM are -15,435 ft-kips. What is the port leg reaction?
- 4551.If you observe any situation which presents a safety or pollution hazard during fuel transfer operations on a MODU, what action should you take FIRST?
- 4552.You are transferring fuel from a supply vessel to your MODU. If you close off one tank in the line of tanks being filled, the rate of flow to other open tanks on the same line will __________.
- 4553.The full period of motion of the DEEP DRILLER while in transit is 7 seconds and the maximum pitch angle as seen on the inclinometers is 7°. From the standpoint of critical motion, the motion is __________.
- 4554.The process of waiting a period of time before pretensioning an anchor is known as __________.
- 4555.It is proposed to moor the DEEP DRILLER in 600 feet of water in a region in which the effective wind velocity could reach 80 knots, significant wave height could reach 30 feet, and the current could be 1.5 knots. If these conditions occurred at the same time from the bow, the environmental force due to the wind would be __________.
- 4556.It is proposed to moor the DEEP DRILLER in 600 feet of water in a region in which the effective wind velocity could reach 80 knots, significant wave height could reach 30 feet, and the current could be 1.5 knots. If these conditions occurred at the same time from the bow, the total environmental force would be __________.
- 4557.What does the term "head" mean when applied to a pump?
- 4558.On offshore drilling units, each fire station is required to be fitted with at least one spanner and at least one __________.
- 4559.On offshore drilling units, each fire station is required to be fitted with a hose which has a nominal diameter of __________.
- 4560.Each fire pump on a MODU must have a pressure gauge located at __________.
- 4561.On a MODU, a fire pump may be used for other purposes if __________.
- 4562.How often must CO2 systems be inspected to confirm cylinders are within 10% of the stamped full weight of the charge?
- 4563.If a man falls overboard from a rig under tow, you should FIRST __________.
- 4564.The indication of a slipping anchor is a(n) __________.
- 4565.Survival practice in the mooring system is to slack off the tensions on the leeward side and __________.
- 4566.After cranes have been installed on offshore drilling units the hooks, hook block, slings, rib and other rigging must be load tested. This test must be performed once each __________.
- 4567.When transferring survivors from an enclosed lifeboat to a rescue vessel, personnel on board the boat should __________.
- 4568.A MODU must have on board a first-aid kit that is approved by the __________.
- 4569.The person assigned to command a lifeboat or inflatable liferaft on a MODU shall have a list of the persons assigned to the lifeboat or liferaft. The list shall include each person's __________.
- 4570.Prior to burning or welding on a fuel tank on a MODU, regulations require that an inspection be made. An entry in the unofficial logbook is required if this inspection is made by __________.
- 4571.Who is responsible for insuring that the accommodations on a mobile offshore drilling unit are maintained in a clean and sanitary condition?
- 4572.When a survival craft drill is held, the person in charge must insure that __________.
- 4573.On offshore drilling units, the EPIRB on board is required to be tested __________.
- 4574.Offshore drilling units must have at least two ring buoys with water lights that, when released from the mounting rack, activate a __________.
- 4575.On offshore drilling units, the lifeboats must be lowered to the water and maneuvered at least once every __________.
- 4576.On offshore drilling units, the lifeboat motors shall be operated in the ahead and astern position at least once each __________.
- 4577.The LWT anchor has two angular positions for the flukes. These are __________.
- 4578.What is the transverse shift in the center of gravity if 200 short tons are placed 10 feet to port of the centerline on a MODU with TCG 0.7 foot starboard of the centerline, and the displacement is 9,000 short tons?
- 4579.What is the new location of the transverse center of gravity if 200 short tons are placed 10 feet to port of the centerline on a MODU with TCG 0.7 foot starboard of the centerline, and displacement 9,000 short tons?
- 4580.What is the new location of the transverse center of gravity if 200 short tons are discharged from 10 feet to port of the centerline on a MODU with TCG 0.7 foot starboard of the centerline, and the displacement is 9,000 short tons?
- 4581.What is the shift in the longitudinal center of gravity if 200 short tons are discharged from 30 feet forward of amidships on a MODU with LCG 1.5 feet forward of amidships, and displacement 9,000 short tons?
- 4582.What is the new location of the longitudinal center of gravity if 200 short tons are discharged from 30 feet forward of amidships on a MODU with LCG 1.5 feet forward of amidships, and displacement 9,000 short tons?
- 4583.A weight of 1,000 kips is equivalent to __________.
- 4584.Which type of hull damage on a floating MODU should be repaired first?
- 4585.The analysis of damaged stability for the DEEP DRILLER, disregards the beneficial effects of countermeasures and __________.
- 4586.In the analysis of damaged stability for the DEEP DRILLER, disregarded are the beneficial effects of moorings and __________.
- 4587.While the DEEP DRILLER is loaded as shown in Sample Form #4 (Drilling), casing is accidentally dropped over the port side. Because the tank sounding level and port forward inclination are rapidly increasing, you decide that tank 1P is damaged. Your best countermeasure is to __________.
- 4588.While the DEEP DRILLER is loaded as shown in Sample Form #4 (Drilling), casing is accidentally dropped over the port side. Because the sounding level and port aft inclination are slowly increasing, you decide that tank 10P has minor damage. Among the possible corrective actions is __________.
- 4589.While the DEEP DRILLER is loaded as shown in Sample Form #4 (Drilling), casing is accidentally dropped over the starboard side. Because the sounding level and starboard inclination are rapidly increasing, you decide that tank 1S is damaged. Your best countermeasure is to __________.
- 4590.While the DEEP DRILLER is loaded as shown in Sample Form #4 (Drilling), casing is accidentally dropped on the starboard side. Because the sounding level and starboard aft inclination are slowly increasing, you decide that tank 10S has minor damage. Among the possible corrective actions is __________.
- 4591.While the DEEP DRILLER is operating as shown in Sample Form #4 (Drilling), casing is accidentally dropped over the port side. If the port aft inclination is slowly increasing, which tank is probably damaged?
- 4592.While the DEEP DRILLER is operating as shown in Sample Form #4 (Drilling), casing is accidentally dropped over the starboard side. If the starboard aft inclination is slowly increasing, which tank is probably damaged?
- 4593.When may a work vest be substituted for a required life preserver?
- 4594.While the DEEP DRILLER is operating as shown in Sample Load Form #4 (Drilling), casing is accidentally dropped over the starboard side. If the starboard forward inclination is slowly increasing, which tank is probably damaged?
- 4595.The plans, for use during emergencies aboard the DEEP DRILLER, are readily available in the __________.
- 4596.The DEEP DRILLER is operating at the maximum allowable KGT at 60 feet draft. What is the value of GMT?
- 4597.The DEEP DRILLER, at 60.0 feet draft in sea water, discharges 275.8 long tons. What is the new draft?
- 4598.With no environmental forces on the DEEP DRILLER, the average of the forward drafts is 61.0 feet, and the average of the aft drafts is 59.0 feet. KGL is 51.13 feet. What is the value of LCG?
- 4599.The DEEP DRILLER, at 58.0 feet draft in sea water, places 275.8 long tons on board. What is the new draft?
- 4600.The DEEP DRILLER, at 58.0 feet draft in sea water, places 200 long tons on board. What is the new draft?