USCG Deck Safety – Question Bank Book 4 (BK4) — page 17
4852 questions with correct answers from the official USCG question bank (2008 edition), book 4. Pass mark 70%. Click a question to see its answer.
Take the full practice test →Free USCG practice test with the real pass mark, no sign-up- 1601.Every different type of sailing rig can be dangerous in certain circumstances. Which situation would most likely be dangerous?
- 1602.When repairing a torn sail at sea, you should __________.
- 1603.In order to prevent galvanic corrosion, an aluminum boat must be insulated from the davits and gripes. Which of the following is acceptable as an insulator?
- 1604.Which statement(s) is(are) TRUE?
- 1605.To prevent a wooden hull from leaking you caulk it __________.
- 1606.On small sailing vessels, the PRIMARY reason for using nylon in a combination chain-nylon anchor line is to __________.
- 1607.How often must the impulse-projected line throwing appliance be test fired?
- 1608.Movement of liquid in a tank when a vessel inclines causes an increase in __________.
- 1609.You are sailing at 8 knots on a beam reach in an apparent wind of 25 knots. Which statement is TRUE?
- 1610.With regard to aerodynamic lift, which statement is TRUE?
- 1611.Which statement is TRUE about sail shape?
- 1612.How does an inert gas system on a tanker function to prevent explosions in cargo tanks?
- 1613.The major lift-producing part of a sail is the __________.
- 1614.Your 40-foot auxiliary sailing vessel has just run aground on a bar. She has a relatively long, deep keel and the tide is falling. You have checked the bilges for damage and found none. Which is the most prudent action to take immediately?
- 1615.A chemical additive to LPG gives it a characteristic __________.
- 1616.Why is gas-freeing rarely required for LPG cargo tanks?
- 1617.Which precaution should be taken when testing a line throwing gun?
- 1618.The gross weight of a fully charged CO2 cylinder is 80 lbs. When the bottle is empty it weighs 60 lbs. What is the minimum acceptable gross weight of the CO2 bottle before it should be recharged by the manufacturer?
- 1619.Line throwing equipment should NOT be operated __________.
- 1620.After allowing for pressure losses, the pressure-volume capacity of an inert gas blower must be able to maintain a pressure, in any cargo tank, at a minimum of __________.
- 1621.An inert gas system on a tanker should be used to __________.
- 1622.You wish to communicate information that the swell in your area is 8-10 feet in height and from the northeast. This swell, as defined in the International Code of Signals, would be described as __________.
- 1623.Your vessel has 3 lifeboats on each side. The aftermost boat on the starboard side is designated as boat number __________.
- 1624.An inert gas system is designed to reduce the possibility of tank explosions by __________.
- 1625.Where are remote readouts for oxygen concentration, pressure, and temperature of an inert gas system required to be located?
- 1626.The regulations that were passed to implement MARPOL 73/78 concerning oil pollution apply to a U.S. flag vessel that sails on which waters?
- 1627.The most effective treatment for warming a crew member suffering from hypothermia is __________.
- 1628.Which method is used to supply inert gas from a flue gas system to the cargo tanks?
- 1629.What is the maximum percent of oxygen, by volume, allowed to be maintained in the cargo tanks prior to the commencement of crude oil tank washing?
- 1630.The purpose of the deck seal in an inert gas system is to prevent __________.
- 1631.Each inert gas system must be designed to supply the cargo tanks with a gas, or mixture of gasses, that has an oxygen content by volume of __________.
- 1632.Coast Guard Regulations permit which of the following systems to be used for fire prevention and the simultaneous inerting of cargo tanks on tank vessels?
- 1633.The blowers of an inert gas generation system aboard a tanker, will be automatically secured if __________.
- 1634.The last 1.0 meter (3.3 feet) of vapor piping before the vessel vapor connection must be painted __________.
- 1635.Which procedure should be followed when individuals are rescued in cold climates and suffer from hypothermia?
- 1636.On a vapor control system, each vessel's vapor connection flange must have a __________.
- 1637.On a hydrocarbon flammability chart the line which extends from 0% to 21.8% oxygen, lying tangent to the flammability range, is called the __________.
- 1638.In order for combustion to occur inside a piping system such as a vapor collection header in a marine emission control system, there must be __________.
- 1639.The high-level overfill tank alarm, installed in the on-board monitoring system, must __________.
- 1640.Tank vessel inerting refers to __________.
- 1641.The maximum allowable oxygen content within the ship's cargo tanks, inert gas piping and the vapor recovery system is __________.
- 1642.What is the report identifier code for the first AMVER report sent at the start of a voyage?
- 1643.Introducing inert gas into a tank already inert with the object of further reducing the oxygen or hydrocarbon content to prevent combustion if air enters the tank is called __________.
- 1644.Each hose used for transferring vapors must __________.
- 1645.During loading, what is the minimum pressure required to be maintained by the inert gas system on cargo tanks?
- 1646.An on-board monitoring system, using level sensors permanently installed in each vessel compartment, will have a high level alarm set at not more than __________.
- 1647.In an inert gas system, high pressure alarms are set in the main vapor collection line to cause an audible and visual alarm if the pressure reaches a certain level. What is the percentage of the lowest relief valve setting at which the alarm must sound?
- 1648.You are on an inerted tankship. A low pressure alarm must be set to cause an audible and visual alarm if the pressure in the tanks cannot be maintained at more than __________.
- 1649.Vapor recovery hoses must be tested yearly at what ratio to their maximum allowable working pressure?
- 1650.A large metallic device, mounted directly in the piping (usually located at the dock near the point where the vapor hose is attached), designed to prevent the passage of a rapidly moving flame through the piping is called a __________.
- 1651.When checking the oxygen content of the cargo tanks prior to loading cargoes requiring vapor recovery, the atmosphere must be sampled __________.
- 1652.Under federal regulations, what minimum level of Blood Alcohol Content (BAC) constitutes a violation of the laws prohibiting Boating Under the Influence of Alcohol (BUI) on commercial vessels?
- 1653.You are operating a liftboat. Before starting jacking operations you should __________.
- 1654.A flooded leg on a liftboat would adversely affect the vessel's stability underway by __________.
- 1655.You are operating a liftboat. When beginning to jack down you should __________.
- 1656.After jacking down your liftboat you have an unexpected list. You find that the only cause of this list must be a flooded leg. Your next course of action should be to __________.
- 1657.After jacking down your liftboat you have an unexpected list. You find that the only cause of this list must be a flooded leg. The list caused by a flooded leg means your vessel has a(n) __________.
- 1658.You are operating a liftboat. When jacking down and free of the bottom you should __________.
- 1659.You are operating a liftboat. When jacking down and a leg becomes stuck on the bottom, you should __________.
- 1660.After jacking down your liftboat you have an unexpected list. You find that the only cause of this list must be a flooded leg. Raising the flooded leg further would adversely affect the boats stability by __________.
- 1661.After jacking down your liftboat you have an unexpected list. You find that the only cause of this list must be a flooded leg. To keep adequate stability you should __________.
- 1662.You are operating a liftboat. In preparation for jacking you should __________.
- 1663.The explosive range of Diesel Oil mixed with air is __________.
- 1664.The flammable limit of methyl ethyl ketone is from __________.
- 1665.On a survival craft VHF radio precautions shall be taken to prevent the inadvertent selection of which channel __________.
- 1666.The Sailing Plan, required by vessels participating in AMVER, should be sent __________.
- 1667.The definition of "partially protected waters", as used in the Regulations does not include __________.
- 1668.What must Inland vessels of 100 GT and over be fitted with for oily mixtures?
- 1669.You are preparing to contain an oil spill. You must first receive approval from the Federal On-Scene Coordinator (OSC) prior to __________.
- 1670.You are inspecting the nonmetallic oil transfer hoses on the vessel you operate. The maximum allowable pressure of the hose is 70 psi. Your inspection confirms the hose did not burst, bulge, leak or abnormally distort under the required static liquid pressure of __________.
- 1671.Which type of vessel shall be required to have an emergency towing arrangement fitted at both ends?
- 1672.The transfer procedures required to be followed on tankships shall contain __________.
- 1673.How often must a compulsory vessel's GMDSS radio station be inspected?
- 1674.Which frequencies and modes are allocated for distress alerting in GMDSS?
- 1675.Which channel has been designated for on-scene communications in GMDSS?
- 1676.Which statement concerning GMDSS maintenance requirements is FALSE?
- 1677.Which statement concerning GMDSS distress alerts is TRUE?
- 1678.What is a GMDSS functional or carriage requirement for compulsory vessels?
- 1679.Which statement concerning reserve sources of energy for GMDSS is FALSE?
- 1680.Which GMDSS control selection may result in limited receiving range?
- 1681.Which channel is designated as the VHF follow-on communications channel and is required in all portable survival craft equipment?
- 1682.How long must GMDSS Radio Logs be retained onboard the ship in original form?
- 1683.How long must GMDSS Radio Logs be retained by the licensee when they relate to a distress situation or disaster?
- 1684.Where is the GMDSS Radio Logbook kept aboard ship?
- 1685.For GMDSS, which statement concerning a compulsory vessel is FALSE?
- 1686.What is the minimum permit or license requirement of a GMDSS Radio Maintainer?
- 1687.Which statement concerning GMDSS Radio Operator requirements is FALSE?
- 1688.Where can GMDSS regulations pertaining specifically to U.S.-flag vessels be found?
- 1689.The combined fan discharge rate in an inert gas system is related to the __________.
- 1690.Each inert gas system gas main must have an automatic shut down valve at the outlet of the gas production plant. This valve must close automatically upon __________.
- 1691.Which U.S. agency issues a Certificate of Financial Responsibility?
- 1692.Each ship having an inert gas system must have a portable instrument to measure concentrations of hydrocarbon vapor in inert atmospheres and also to measure __________.
- 1693.The component in an inert gas system used for cleaning the gas of solid and sulfur combustion products, while simultaneously cooling the inert gas, is called the __________.
- 1694.On offshore drilling units when two means of escape are provided from a space above the main deck, one means of escape must be required for rapid escape to __________.
- 1695.Your vessel displaces 869 tons and measures 136'L x33'B. You ship a large wave on the after deck which measures 52'Lx 33'B. The weight of the water is estimated at 52.8 tons. What is the reduction in GM due to free surface before the water drains overboard?
- 1696.A sloop is a sailing vessel with __________.
- 1697.Your vessel displaces 562 tons and measures 121'L x 29'B. You ship a large wave on the after deck. What is the reduction to GM due to free surface before the water drains overboard, if the after deck measures 46'L x 29'B and the weight of the water is 41 tons?
- 1698.Which is standing rigging?
- 1699.Which of the listed functions is the purpose of a gas scrubber in an inert gas generation system?
- 1700.For GMDSS, which statement concerning compulsory vessels is TRUE?