USCG Deck Safety – Question Bank Book 4 (BK4) — page 48
4852 questions with correct answers from the official USCG question bank (2008 edition), book 4. Pass mark 70%. Click a question to see its answer.
Take the full practice test →Free USCG practice test with the real pass mark, no sign-up- 4701.A low pressure annular preventer which is used to direct flow of kick fluids away from the rig floor is called a __________.
- 4702.The shear rams of a MODU blowout preventer stack are used in emergency well control to __________.
- 4703.The retrievable subsea units that contain the pilot valves and regulators for operating the subsea blowout preventers are called __________.
- 4704.A casing string that is run below the previous casing string, but does not extend to the wellhead is called a __________.
- 4705.Oil well casing will fail when the external pressure exceeds the internal pressure by a differential equal to the casing's rated __________.
- 4706.Lifeboat winches on a MODU are required to be inspected and an entry made in the logbook. What should this entry include?
- 4707.You are involved in an emergency landing of a helicopter on the water. You should inflate your life jacket __________.
- 4708.After being launched from MODUs, totally enclosed survival craft which have been afloat over a long period require __________.
- 4709.A jack-up displacing 15,000 kips has a KG of 20 feet. The legs weighing 3,500 kips are lowered 100 feet. What is the new KG?
- 4710.A floating jack-up with displacement of 15,000 kips has its LCG 108 feet aft of frame zero (AFO). If 400 kips are loaded at 120 feet AFO and 800 kips are loaded 150 feet AF0, what is the new LCG?
- 4711.A floating jack-up with displacement of 15,000 kips has its LCG 106 feet aft of frame zero (AF0). If 200 short tons are loaded at 20 feet AF0 and 400 short tons are loaded 149 feet AF0, what is the new LCG?
- 4712.There is a fire aft aboard your vessel. To help fight the fire, you should put the __________.
- 4713.A jack-up with displacement of 10,000 kips has its LCG 100 feet aft of frame zero (AFO). If 200 kips are loaded at 60 feet AFO and 100 kips are discharged from 20 feet AFO, what is the new LCG?
- 4714.A floating jack-up with displacement of 16,200 kips has its LCG 110.37 feet aft of frame zero (AF0). If 200 short tons are discharged from 120 feet AF0 and 400 short tons are discharged from 150 feet AF0, what is the new LCG?
- 4715.What is the longitudinal shift in the center of gravity if 200 short tons is moved ten feet to port and 30 feet forward on a MODU with a displacement of 8,960 long tons?
- 4716.An elevated jack-up weighs 14,000 kips. Its TCG is located 1.0 foot to starboard of the centerline. What would be the new TCG for the jack-up if the drill floor, weighing 700 kips, is skidded 10 feet to port?
- 4717.An elevated jack-up weighs 14,000 kips. The drill floor, weighing 700 kips, is skidded 10.0 feet to starboard. The change in TCG is __________.
- 4718.A jack-up 210 feet in length is level during transit. The LCF is 140 feet aft of the bow. How much weight should be applied at the bow to level the jack-up if 150 kips are loaded at the transom?
- 4719.When displacement increases, the free surface corrections for slack tanks __________.
- 4720.When two generators are operating in parallel, what will happen if one engine driving a generator shuts down?
- 4721.When a rescuer finds an electrical burn victim in the vicinity of live electrical equipment or wiring, his first step is to __________.
- 4722.Basic emergency care for third degree electrical burn is to __________.
- 4723.When a patient has an electrical burn, it is important to __________.
- 4724.Since electrical burn victims may be in shock, the FIRST medical response is to check for __________.
- 4725.In battery charging rooms, exhaust ventilation should be provided __________.
- 4726.A fuel-air mixture below the lower explosive limit is too __________.
- 4727.Good housekeeping on a vessel prevents fires by __________.
- 4728.Accumulations of oily rags should be __________.
- 4729.Paints and solvents on a vessel should be __________.
- 4730.After extinguishing a fire with CO2, it is advisable to __________.
- 4731.The disadvantage of using CO2 is that the __________.
- 4732.Size I and II fire extinguishers are designated as __________.
- 4733.Dry chemical extinguishers may be used on what class of fires?
- 4734.CO2 cylinders must be recharged when the weight of the charge in the cylinder is less than what percent of the stamped full weight of the charge?
- 4735.Halon from extinguishers used on a class B fire, should be directed __________.
- 4736.Halon extinguishers used on a class C fire should be directed at the __________.
- 4737.The principal personnel hazard unique to Halon extinguishers is __________.
- 4738.You are releasing carbon dioxide gas (CO2) into an engine compartment to extinguish a fire. The CO2 will be most effective if the __________.
- 4739.The primary function(s) of an automatic sprinkler system is(are) to __________.
- 4740.When flammable liquids are handled in a compartment on a vessel, the ventilation for that area should be __________.
- 4741.A galley grease fire on the stove may be extinguished using_______.
- 4742.Overhauling a fire in the living quarters on a vessel must include __________.
- 4743.If heavy smoke is coming from the paint locker, the FIRST firefighting response should be to __________.
- 4744.After extinguishing a paint locker fire using the fixed CO2 system, the next action is to have the space __________.
- 4745.After abandoning ship, you should deploy the sea anchor from a liferaft to __________.
- 4746.If the liferaft capsizes, all personnel should leave the raft and __________.
- 4747.When personnel are lifted by a helicopter from an inflatable liferaft, the personnel on the raft should __________.
- 4748.When should you use distress flares and rockets?
- 4749.Once you have established the daily ration of drinking water in a survival situation, how should you drink it?
- 4750.When anchoring in an area with a soft bottom, the fluke angle of an anchor should be set at __________.
- 4751.Radiation spreads a fire by __________.
- 4752.When anchoring in an area with a hard bottom, the fluke angle of an anchor should be set at __________.
- 4753.A solution to overcome tripping defects is an arrangement of special plates on either side of the flukes, designed to set them in the correct tripping position. These special plates are called __________.
- 4754.Which formula can be used to calculate metacentric height?
- 4755.In the absence of external forces, adding weight on one side of a floating vessel causes the vessel to __________.
- 4756.Subtracting FSCT from KGT yields __________.
- 4757.For an upright vessel, draft is the vertical distance between the keel and the __________.
- 4758.A wind has caused a difference between drafts starboard and port. This difference is __________.
- 4759.The moment of a force is a measure of the __________.
- 4760.The magnitude of a moment is the product of the force and __________.
- 4761.The difference between the height of the metacenter and the height of the center of gravity is known as the __________.
- 4762.When initial stability applies, the height of the center of gravity plus the metacentric height equals the __________.
- 4763.Initial stability is indicated by __________.
- 4764.At all angles of inclination, the metacenter is __________.
- 4765.If water is rising in the bilge of a lifeboat, you should FIRST __________.
- 4766.The original equilibrium position is stable when __________.
- 4767.The center of buoyancy is located at the __________.
- 4768.The value of the righting arm at an angle of loll is __________.
- 4769.When inclined to an angle of list, the value of the righting arm is __________.
- 4770.When inclined to an angle of list, the value of the righting moment is __________.
- 4771.What is used as an indicator of initial stability?
- 4772.What is the stability term for the distance from the center of gravity (G) to the Metacenter (M), when small-angle stability applies?
- 4773.The water in which a vessel floats provides vertical upward support. The point through which this support is assumed to act is known as the center of __________.
- 4774.The difference between the initial trim and the trim after loading is known as __________.
- 4775.A tank which is NOT completely full or empty is called __________.
- 4776.The difference between the starboard and port drafts due to wind or seas is called __________.
- 4777.The geometric center of the underwater volume of a floating vessel is the center of __________.
- 4778.The difference between the height of the metacenter and the height of the center of gravity is __________.
- 4779.On a vessel, multiplying a load's weight by the distance of the load's center of gravity above the baseline results in a(n) __________.
- 4780.Reducing the liquid free surfaces in a vessel reduces the __________.
- 4781.Stability is determined principally by the location of the point of application of two forces: the upward-acting buoyant force and the __________.
- 4782.Stability is determined principally by the location of the point of application of two forces: the downward-acting gravity force and the __________.
- 4783.Stability is determined principally by the location of two points in a vessel: the center of buoyancy and the __________.
- 4784.With no environmental forces acting on the vessel, the center of gravity of an inclined vessel is vertically aligned with the __________.
- 4785.With no environmental forces, the center of gravity of an inclined vessel is vertically aligned with the __________.
- 4786.In the absence of external forces, the center of buoyancy of an inclined vessel is vertically aligned directly below the __________.
- 4787.In the presence of external forces, the center of buoyancy of an inclined vessel is vertically aligned with the __________.
- 4788.With no environmental forces, the center of gravity of an inclined vessel is vertically aligned directly above the __________.
- 4789.Aboard a vessel, dividing the sum of the transverse moments by the total weight yields the vessel's __________.
- 4790.Aboard a vessel, dividing the sum of the vertical moments by the total weight yields the vessel's __________.
- 4791.When the height of the metacenter is the same as the height of the center of gravity, the upright equilibrium position is __________.
- 4792.When the height of the metacenter is greater than the height of the center of gravity a vessel has which type of stability?
- 4793.When the height of the metacenter is less than the height of the center of gravity, a vessel has which type of stability?
- 4794.You are in Inland Waters of the United States. You may discharge overboard __________.
- 4795.When the height of the metacenter is greater than the height of the center of gravity, the upright equilibrium position is stable and stability is __________.
- 4796.Unstable equilibrium exists at small angles of inclination when __________.
- 4797.When stability of a vessel is neutral, the value of GM __________.
- 4798.When the height of the metacenter is less than the height of the center of gravity of a vessel, the upright equilibrium position is __________.
- 4799.When the height of the metacenter is the same as the height of the center of gravity of a vessel, the upright equilibrium position is __________.
- 4800.Stable equilibrium for a vessel means that the metacenter is __________.