F4 Marine Engineering — Management Level — Page 3
704 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 201.The steadiness of the mode of ship internal combustion engines depending on the fuel supply equipment is the lowest with:
- 202.What is true about the clarification mode of fuel and oil separators?
- 203.Does turbulence increase the heat transfer effect in plate type coolers?
- 204.The marine steam boiler vent valve is located:
- 205.The smoke from the boiler has a white color. What is the reason?
- 206.What is the likely reason for the dark bluish color of exhaust gases in the main ship X-head internal combustion engine?
- 207.What material is used to cast workpieces with small dimensions, complex configuration, accurate dimensions and small surface roughness?
- 208.Through which of the casting methods, workpieces of any material with high density and accuracy, low surface roughness and complex configuration are obtained?
- 209.Structures of what material are most often welded in machine engineering?
- 210.Which of the methods guarantees the most accurate cutting of metal and non-metal workpieces at high temperatures?
- 211.What is meant by roller caliber?
- 212.What do we aim to achieve with carburizing, nitriding, chroming and silicification carried out at high temperatures?
- 213.Which of the methods are used to extrude pipes, plates, foils and blown products from
- 214.Which of the methods produces the best quality seamless steel pipes?
- 215.External taper surfaces are machined by chip removal by which method?
- 216.Which science deals with questions of crystal structure, physical, mechanical, chemical and technological properties of metals?
- 217.What are the cross girders in the bedplate for?
- 218.What is the ship's engine foundation connected to?
- 219.What does the main marine internal combustion engine bedplate rest on the ship's foundation
- 220.Is the tightening force on the nuts of the bolts that attach the bedplate to the foundation important?
- 221.If the marine internal combustion engine is improperly secured to the ship's foundation, what are the consequences
- 222.What is the reason for attaching diesel generators to the ship's foundation by means of dampers?
- 223.The part that unites the crankcase and the cylinder block in medium and high-speed marine internal combustion engines is called
- 224.The main bearings of marine internal combustion engines are mounted:
- 225.What is the main bearings in the marine diesel engines?
- 226.What do the main bearings form in marine internal combustion engines
- 227.What should the design and materials of the main bearings provide?
- 228.The most essential condition for the normal operation of the main bearings in marine internal combustion engines is
- 229.How does viscosity affect the resistance of the oil layer separating the surfaces in main bearings?
- 230.What are bearing shells covered with?
- 231.Under constant other conditions, if at the end of compression, the temperature in the combustion chamber of the marine internal combustion engine increases, the duration of the induction period, measured as the crankshaft angle,
- 232.Under constant other conditions, if at the end of compression, the pressure in the combustion chamber increases, the duration of the induction period, measured as the crankshaft angle
- 233.The fuel supply equipment of MDE with VIT control aims to ensure:
- 234.What happens if the total acid number of the MDE lube oil increases?
- 235.Crosshead diesel engines working with low-sulfur fuels use cylinder oils with:
- 236.The presence of vanadium in fuels leads to:
- 237.Why is it important to keep the viscosity of the MDE lubricating oil within operating limits?
- 238.In the analysis of the oil of an auxiliary MDE, a viscosity above the permissible value was found. What will your actions be?
- 239.What could be the reason for the increase in the viscosity of the MDE lubricating oil?
- 240.What could be the reason for the reduction in the viscosity of the MDE lubricating oil?
- 241.In the oil system of Main engine, a water content higher than that allowed by the manufacturer was found. What action will you take?
- 242.The main purpose of using cylinder oil in crosshead engines is:
- 243.What will be the effect of continuous operation of the oil at excessively high temperature on the quality of the MDE lubricating oil?
- 244.Why should the timing of the cylinder oil supply be checked for crosshead main engines?
- 245.What does the high amount of tin show when analyzing the marine ICE oil?
- 246.What type of oils are used in the lubricators for crosshead marine main ICE?
- 247.Oils with a high viscosity index are used for:
- 248.If water in oil forms an emulsion, can separation remove the water?
- 249.How does oil viscosity change if water gets into it?
- 250.What should be the minimum flash point of Aux. Engine crankcase oils?
- 251.How many cubic meters of air at 15 ºС are approximately required to burn one liter of light marine fuel?
- 252.The detergent-dispersing properties of the oils reflect:
- 253.High alkaline cylinder oils are used in the operation of internal combustion ship engines
- 254.What determines the operating temperature range of oils?
- 255.In comparison to trunk piston marine internal combustion engines, crosshead marine engines have circulating oils that have
- 256.In the circulating oil system of a trunk piston marine internal combustion engine, the main purpose of the oil is to
- 257.The concept of coke number gives an idea of the tendency of fuels to:
- 258.What is meant by fuel viscosity?
- 259.The corrosion properties of diesel fuels are characterized by:
- 260.In main marine internal combustion engines, the neutralization of sulfur contained in the fuel mainly occurs through
- 261.In comparison to trunk piston marine engines, the circulating oils for crosshead marine engines have
- 262.The alkalinity of the cylinder oil indicates its ability to neutralize:
- 263.Some four-stroke marine internal combustion engines have nozzle cooling. Why?
- 264.How do the environmental losses change when the fuel consumption of boiler increases ?
- 265.How many holes are drilled in the cylinder liner of a crosshead Marine diesel engines (MDE) through which cylider oil is supplied ?
- 266.According to the second law of thermodynamics, the conversion of thermal energy into mechanical work is possible when:
- 267.The total thermodynamic efficiency is:
- 268.The intake process in the two-stroke Marine diesel engines occurs when the piston moves from:
- 269.The term useful volume (Swept Volume or Displacement volume) of a two-stroke Marine diesel engines (MDE) means:
- 270.Why is it most efficient to heat a large volume of water if the heating is done from the lowest point of the vessel containing the liquid?
- 271.What do we mean by theoretically required quantity of air?
- 272.Is the theoretical quantity of air needed to burn a unit of diesel and gasoline fuel the same?
- 273.What is the theoretical quantity of air needed to burn a unit of diesel fuel/1 kg./?
- 274.State what is the notation (symbol) of air ratio:
- 275.When the air ratio is greater than 2, the fuel-air mixture is:
- 276.In what limits should the excess air ratio move in low-speed Marine diesel engine?
- 277.How is the excess air ratio of a given Marine diesel engine (MDE) determined in its thermal calculation?
- 278.The power measured directly in the Marine diesel engine (MDE) cylinder is called:
- 279.The power of the Marine diesel engine (MDE) measured on the crankshaft is called:
- 280.Does the power of Marine diesel engine (MDE) depend on the diameter of the cylinder?
- 281.In the formula Re=Mv.ω, "ω" means:
- 282.The indicated efficiency of Marine diesel engine (MDE) gives us information about:
- 283.Does the indicated efficiency depend on the power of Marine diesel engine (MDE)?
- 284.The thermal and mechanical losses of Marine diesel engine (MDE) are accounted for by:
- 285.The quantity of fuel consumed by Marine diesel engine (MDE) per unit of time per unit of power is called:
- 286.The diameter of the cylinder and the stroke of the piston are ....................... dimensions for Marine diesel engine (MDE).
- 287.The S/D ratio in cm shows whether the Marine diesel engine (MDE) is:
- 288.The formula P = p.π.D²/4 serves to determine
- 289.The fuels used in Marine diesel engine (MDE) are:
- 290.Marine diesel engine with a wet sump shows:
- 291.What is the condition for obtaining a load characteristic of Marine diesel engine (MDE):
- 292.What is the condition for obtaining a governor characteristic of Marine diesel engine (MDE):
- 293.Which governor characteristic of Marine diesel engine is called isochronous:
- 294.Which governor characteristic of Marine diesel engine (MDE) has speed droop:
- 295.Is there a difference between the load and isochronous governor characteristic of Marine diesel engine (MDE)?
- 296.When the governor characteristic of Marine diesel engine needs to have speed droop:
- 297.What should be the governor characteristics when there are two Main Marine diesel engines:
- 298.To which main type of characteristics does the limit characteristic of Marine diesel engine (MDE) fall:
- 299.What is the distribution of the temperature load of the MDE cylinder liner?
- 300.How does the mechanical stress of the Marine diesel engine (MDE) change when the maximum pressure and the degree of its rise are kept constant, with a decrease in the rotation speed?