F4 Marine Engineering — Management Level — Page 2
704 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 101.In which part of the cylinder liner of marine ICE is piston wear the heaviest?
- 102.What material are cylinder liners of marine ICE made of?
- 103.How is the cylinder liner fixed to the marine ICE cylinder block?
- 104.What is the concept of "Maximum continuous power" for a main marine ICE
- 105.What is the relationship between the concepts of "Maximum continuous power" and "Nominal power" of marine main ICE
- 106.What is the relationship between the concepts of "Maximum power" and "Nominal power" of the Marine Main ICE
- 107.What is the relationship between the concepts of "Maximum continuous power" and "Maximum power" of marine main ICE
- 108.What is the relationship between the concepts of "Overload power" and "Maximum power" marine main ICE
- 109.What does the term "thermal valve clearance" mean in Marine Diesel Engine (MDE)?
- 110.Some Marine Diesel Engine (MDE) have rotary valves. What is the reason for this?
- 111.What is the purpose of the safety valve on the cylinder head of the Marine Diesel Engine (MDE)?
- 112.How is the opening pressure of the fuel injection valve (nozzle) adjusted?
- 113.In order to achieve the best fuel combustion in the Marine diesel engines (MDE), the following is necessary:
- 114.Which statement is not true about nitriding?
- 115.What does the term "speed droop" mean in CAP of rotation speed of Marine Diesel Engine (MDE)?
- 116.What law do direct-acting governors provide?
- 117.For what reason do some engines have rotocaps on the valves to rotate them during operation?
- 118.What material are cylinder liners of Marine diesel engines (MDE) made of?
- 119.How is prevented the passage of water from the cooling space between the cylinder liner and the cylinder block at Marine diesel engines (MDE)?
- 120.Is a gasket placed between the cylinder head and the cylinder block.
- 121.When sailing in tropical conditions with high air humidity, it is necessary:
- 122.One-dimensional measuring instruments are called:
- 123.With other conditions being constant, if the fuel is with a higher cetane number, how will the length of the induction period, measured as a crankshaft angle, change:
- 124.With other conditions being constant, if the engine speed is decreased, how will the length of the induction period, measured as an angle along the crankshaft, change:
- 125.With other conditions being constant, if the rotational speed of the MDE is decreased, how will the start of combustion change according to the position of the crankshaft:
- 126.If the RPM of the MDE is constant, and during an induction period of unchanged duration more fuel is evaporated how will the maximum pressure in the cylinder change:
- 127.If the RPM of the MDE is constant, and during an induction period of unchanged duration more fuel is evaporated, how will the indicated efficiency change:
- 128.If the RPM of the MDE is constant and during an induction period of unchanged duration more fuel is evaporated, how will the mechanical efficiency change:
- 129.With a constant load on the MDE when the RPM increase, the wear of the cylinder-piston group:
- 130.At constant RPM of the MDE, when the load is increased, the wear of cylinder-piston group:
- 131.If the RPM of MDE are from 70 to 100% of the nominal, at the same propeller curve, the wear of the cylinder-piston group :
- 132.When the piston rings of the MDE are worn, the ratio of excess air:
- 133.When the piston rings of the MDE are worn and the ratio of excess air falls below 3, the indicated efficiency:
- 134.When the piston rings of the MDE are worn and the ratio of excess air falls below 3, the effective efficiency:
- 135.When the nozzle holes of the MDE are worn, the duration of combustion:
- 136.When the nozzle holes of the MDE are worn, the duration of combustion increases during:
- 137.When the nozzle holes of the MDE are worn, the indicated efficiency:
- 138.When the nozzle holes of the MDE are worn, the indicated efficiency decreases due to the extension of the combustion during
- 139.When the nozzle holes of the MDE are worn, the effective efficiency decreases due to the extension of combustion during
- 140.intensive carbon deposit formation in the grooves of the piston rings of the MDE begins at temperatures above:
- 141.The feeler gauge is:
- 142.With manual control of the Main MDE, its acceleration proceeds according to:
- 143.How does increasing the excess air ratio affect gas side corrosion in marine steam boilers?
- 144.If the viscosity of an auxiliary engine oil decreases as a result of dilution with light fuel, which of the following actions is correct?
- 145.Which test determines the dry residue in boiler water?
- 146.What is the reason for the plate type coolers to work with inside pressure up to 10 Bar?
- 147.In which of the ideal /thermodynamic / heat engine cycles is the efficiency of the supplied heat the greatest?
- 148.Which two ideal processes are thermodynamically most similar?
- 149.What type of pumps are most suitable for use as feed pumps for bilge separators?
- 150.For fluids with a higher specific viscosity, the orifice of the gravity regulating disc of the separator should be:
- 151.The pressure in the cylinder lubrication lubricators is controlled by:
- 152.Which of the ship power plants has the greatest service life:
- 153.The speed ratio of centrifugal pumps depends on which three parameters?
- 154.Which statement is true about centrifugal pumps?
- 155.For what purpose are the bearing shells fixed in the bearing seats?
- 156.An expanded indicator diagram for MDE is obtained:
- 157.The accurate plotting of TDC on the expanded indicator diagram mostly affects the accuracy of determining:
- 158.To determine the indicated power of MDE, it is necessary to measure:
- 159.With constant control parameters and cyclic portion of fuel, with a decrease in the RPM of the Marine ICE, the temperature of the components of the fuel
- 160.With constant control parameters and cyclic portion of fuel,, with a decrease in theRPM of the Marine ICE, the temperature stress of the components of
- 161.If the rotation frequency of the Marine ICE and the start of fuel supply are constant, with an increase in the cetane number of the fuel, the rate of rise of pressure in the cylinder during the second phase of
- 162.When the indicator drive of the marine ICE cuts off part of the indicator diagram in the scavenging area, when determining the mean indicated pressure:
- 163.When the marine ICE indicator drive cuts off a portion of the indicator chart in the scavenging area, the area of the indicator diagram:
- 164.What should be the reaction of the boiler water ?
- 165.Where does oxygen corrosion develop preferentially in boilers ?
- 166.What is the steam pressure in the primary circuit of double-circuit boilers?
- 167.Which steam boilers are hydraulically tested?
- 168.What characterizes the white smoke from the boiler chimney ?
- 169.As the temperature of the air at the cylinder inlet increases, which of the phases of combustion is reduced?
- 170.Which of the following lubrication systems in turbocharger units cannot be used to lubricate sliding bearings?
- 171.Turbine wheels of turbocharger units cannot be:
- 172.Is it possible for the compressor part of the turbocharger unit to have a rolling bearing unit, and for the turbine - a sliding one?
- 173.After installation, should the radial runout of the turbocharger oil pumps be checked?
- 174.The boiler water reaction affects which processes in the marine steam boiler?
- 175.For the highest efficiency of the evaporator operation, the temperature of the superheated vapors of the refrigerant should be:
- 176.What is the crankcase pressure of the freon compressor?
- 177.What is at risk of low-temperature corrosion in the steam boilers:
- 178.How can the presence of air in the refrigeration system be determined?
- 179.Which indicators should be measured to obtain the indicated efficiency?
- 180.What other losses does the indicated efficiency account for that the thermodynamic efficiency does not?
- 181.At what fuel injection advance angle do marine main engines operate at rated nominal load?
- 182.What could be the cause of the black smoke coming out of the main engine funnel?
- 183.Dark color of marine diesel engine (MDE) exhaust gases can be obtained by:
- 184.The condition of Marine Diesel Engine (MDE) can be determined by the color of the exhaust gases. Dark color means:
- 185.Contaminated or partially clogged exhaust ports in Marine Diesel Engine (MDE) can cause:
- 186.High exhaust gas temperature in two-stroke Marine Diesel Engine (MDE) is caused by:
- 187.Which of the processes is not classified as thermochemical treatment?
- 188.Passivation is a process of:
- 189.Which of the listed reasons causes a decrease in the flexibility of the piston rings of the Marine diesel engine (MDE)?
- 190.Which of the following reasons necessitates to guarantee the purity or composition of protective anode alloys?
- 191.Each steam boiler under all operating conditions must have independent from each other operational means of feeding not less than:
- 192.How many pressure gauges for indicating the pressure in the steam space should each steam boiler have?
- 193.What is the purpose of the non-return valve in the suction side of centrifugal pumps?
- 194.What actions are imperative when the pH of the boiler water is < 7?
- 195.On which parameter does the flow rate of centrifugal pumps depend the most?
- 196.On which parameter does the flow rate of positive displacement pumps depend the most?
- 197.In which part of the cylinder liner of Marine diesel engines (MDE) is the maximum wear from the piston?
- 198.The axial thermal expansion of rotors with externally located bearing units is from:
- 199.What is the difference in steam pressure at the inlet and outlet of a single-stage jet steam turbine:
- 200.Which of the following types of turbines has the least axial load?