F1 Electrical, electronic and control engineering — ETO (CMKE, Poland) — Page 2
586 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 101.The function performed by the EXCLUSIVE NOR (EX NOR) 2-input gateway can be written as
- 102.What role does the system with the following symbol play:
- 103.What does the system with the following symbol contain:
- 104.The EXCLUSIVE OR (EX OR) gateway is represented by the following symbol
- 105.The NOR gateway is represented by the following symbol
- 106.The following environment is used to prepare digital control algorithms for PLD programmable systems
- 107.In PAL architecture, the matrix of the product and sum fulfills the following conditions
- 108.The figure shows a diagram of the 4-bit natural binary code translator to the Gray code. Determine the signal at the outputs of the circuits G3, G2, G1, G0 when the signal 1 0 0 0 1 is given on the inputs B3, B2, B1, B0 respectively.
- 109.Inputs D, C, B, A have the following weights: 8,4,4,2,1 respectively, whereas addresses inputs A, B of UCY 74153 multiplexer have the following weights: 1,2 respectively. Determine the signal at the circuit output when the input D, C, C, B, A is given a signal of 1 0 0 0 0.
- 110.The logical topology of a computer network describes:
- 111.What is the diameter of the 12 AWG wire when we know that the diameter of the 6 AWG is 4.115:
- 112.In which layer of the ISO/OSI model does switch function?
- 113.What is a collision domain?
- 114.What is a transmission medium?
- 115.Which port is the default port for an SMPT server?
- 116.Which layer is IP protocol included in in the ISO/OSI model?
- 117.A proxy server is designed to:
- 118.Telnet makes it possible to:
- 119.VLAN is:
- 120.The maximum length of an UTP cable between active devices from the patch panel to the socket should be:
- 121.In order to prevent modal dispersion in a multimode fibre, we can:
- 122.An STP cable is used:
- 123.What logical topology is based on application of a CSMA/CD protocol?
- 124.What network technology features embedded QoS mechanisms?
- 125.DQDB is an example of which type of topology?
- 126.DNS is:
- 127.DHCP is:
- 128.A MAC sublayer of the second layer of the ISO/OSI model in a IEEE 802.3 standard contains:
- 129.Setting a Profibus DP master includes:
- 130.Setting a Slave in a Profibus DP network includes:
- 131.What is the topology type of a Profibus DP network?
- 132.The bus of a Profibus network features terminators. Which of the terminators of the bus of Profibus DP have to be enabled:
- 133.Replacing a damaged Profibus DP-Slave requires:
- 134.Enabling communication of a PLC in an Industrial Ethernet network using a TCP/IP protocol requires:
- 135.Communication of a PLC – Client in an Industrial Ethernet network using an S7_Connection protocol requires:
- 136.A “Connection” set for a PLC functioning in an Industrial Ethernet network includes:
- 137.Communication of a PLC through a Modbus RTU network requires equipping the PLC with which of the following modules:
- 138.Connecting a new slave to a Modbus RTU network requires:
- 139.What method of network access is applied in an Industrial Ethernet network?
- 140.What method of network access is applied in a single master Profibus DP network?
- 141.What does a variable in a controller stand for:
- 142.Variable type defines the set of values a given variable may assume. An INT type variable means that the variable may assume:
- 143.How many areas is the memory of an S7-1200 controller divided into:
- 144.A controller offers usually ROM, RAM, and EEPROM memory. Programmes are stored in:
- 145.Access address to a single bit in a memory area includes:
- 146.Access address to a byte in a memory area includes:
- 147.Composite types:
- 148.A structure is a composite type that:
- 149.How many times will the following FOR loop execute? FOR INDEX:= 1 TO 50 BY 2 DO ... ... END_FOR;
- 150.A WHILE loop is executed until the loop execution condition is:
- 151.A REPEAT/UNTIL loop is executed until the loop execution condition is:
- 152.PTO is an output with modulation of:
- 153.A PWM output provides a square wave of a fixed period and variable duty cycles, which is achieved by changing the:
- 154.One of the equipment features of a PLC is compatibility with an RTD module. The module is used to:
- 155.HSCs (High Speed Counters) used in a controller make it possible to:
- 156.Local variables can be defined as follows:
- 157.Local variables:
- 158.A COMPACT type PLC is composed of the following modules:
- 159.Timers, counters, registers, flags belong to:
- 160.A simplified operating cycle of a PLC has been shown in point:
- 161.What logical function does the program below execute?
- 162.A program containing a relay (instruction) reacting to transitions has been placed in a controller’s memory. The figure shows two equivalent solutions. Please indicate the correct timing diagram illustrating the effect of relay M1 if input J1 has a timing diagram as shown below:
- 163.Which of the programs executes the function of a latching system (J1 – start, J2 – stop):
- 164.A safe start of a control system based on a PLC controller involves:
- 165.A safe stop of a control system based on a PLC controller involves:
- 166.Defects in the block module of a controller and in actuators can be identified by applying:
- 167.In a temperature monitoring system based on a PLC, a temperature monitoring relay with an output signal of 4 ÷ 20 mA has been used. The relay should be connect to:
- 168.Select the PLC random access memory area set that offers the right labelling:
- 169.A PLC’s “Clock Memory” refers to:
- 170.The value of byte QB0 is 15. The value of bit Q0.3 is:
- 171.Indicate the correct address of an input bit variable:
- 172.Setting a PLC to MRES leads to:
- 173.“Resetting to factory settings” via the sequence of the position of a PLC switch leads to:
- 174.A momentary disconnection of the battery from the CPU module, or a battery replacement leads to:
- 175.Damage of the CPU module of a PLC requires:
- 176.Removing a PLC MMC memory card is permitted when:
- 177.An increase in the temperature in a metal conductor:
- 178.Metal conductivity depends mainly on:
- 179.Which sentence describes the properties of a semiconductor:
- 180.The unit of conductivity is:
- 181.The unit of resistivity is:
- 182.Shipboard electrical systems should be manufactured with the use of the following conductive materials:
- 183.Which of the following materials offers the highest conductivity?
- 184.What materials are used most often in manufacturing sliding contacts:
- 185.Cathodic protection involves:
- 186.Special conductive materials are:
- 187.In which of the following metals the phenomenon of temperature superconductivity does not occur?
- 188.Which of the following materials is not a semiconductive material?
- 189.Application of a varistor protects an electrical circuit against:
- 190.The SI unit for (absolute) permittivity is:
- 191.In the case of F class (heat resistance class) insulation, the permitted continuous operating temperature is:
- 192.The simplest method of cathodic protection of ship hulls is:
- 193.Synthetic gas electrical insulation materials include:
- 194.Sulphur hexafluoride in operated medium- and high-voltage equipment is a substance:
- 195.The highest permitted level of temperature of insulating oil in contact with oxygen in conditions of continuous operation should not exceed:
- 196.What type of dielectrics is the notion of surface resistivity applied to?
- 197.Which of the following solid dielectrics has the lowest relative permittivity?
- 198.Which of the following does not describe the qualities of organic dielectrics?
- 199.A dielectric’s ability to resist the formation of permanently or temporarily conductive bridges, chemical decomposition, or mechanical damage (e.g. cracking) refers to:
- 200.A phenomenon involving induction occurring in a body found inside an external magnetic field of the opposite field, reducing the effect of the external field, refers to: