F4 Marine Engineering — Operational Level — Page 2
283 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 101.The guide steam vanes are fixed to the:
- 102.The high temperature corrosion in the steam boilers appears in:
- 103.The housing of the main steam turbine is always manufactured with
- 104.The increase of which phase of the fuel injection in the Marine ICE impairs to the greatest extent the efficiency of the combustion process?
- 105.The indicated engine efficiency is of greatest value when combustion begins:
- 106.The indicated power of marine diesel engines
- 107.The instrument for measuring the speed of the main steam turbine rotor is called:
- 108.The introduction of an additional loop in the steam boiler is done in order to:
- 109.The load limiter of the mechanical speed governor restricts the work of the Marine internal combustion engine to the
- 110.The lubricating pump of the cross-head ICE is a
- 111.The main engine VIT fuel injection aims to provide:
- 112.The main bearings of the ship engine are lubricated by the lubrication system
- 113.The main purpose for using cylinder oil in cross-head main ship engine is:
- 114.The main purpose of the high pressure fuel pump delivery valve of the marine internal combustion engine is:
- 115.The main purpose of the ventilation valve in the Marine steam boiler steam superheater is
- 116.The marine internal combustion engine operating mode will be considered to be "optimal" when:
- 117.The mean indicated pressure in the internal combustion engine:
- 118.The mean indicated pressure with late-fuel injection in a modern main engine decreases as much as it decreases:
- 119.The mechanical losses of the ship internal combustion engine depend on:
- 120.The notion “loading” of the main ship engine is most precisely determined by
- 121.The power measured at crankshaft on the main ship engine is called:
- 122.The power, measured directly in the cylinder of the Marine internal combustion engine is called:
- 123.The process of conversion of metals and alloys from liquid to solid state is called
- 124.The process of enriching the surface layer of steel with chromium in order to increase the resistance to wear, corrosion and oxidation at high temperatures is called:
- 125.The process of removing internal stress and improving strength properties of steel is called:
- 126.The propeller characteristic is considered to be " heavy" when the gradient in relative form is:
- 127.The property of metals to resist the destructive action of external forces is called:
- 128.The property of metals to resist the destructive action of external forces is called
- 129.The property of the metal to take its original form is called
- 130.The purpose of the blocking???locking devices in the reversing system of the marine internal combustion engine is:
- 131.The purpose of the combustion chamber in a gas turbine engine is:
- 132.The purpose of the labyrinth seal in a steam turbine is to:
- 133.The purpose of the lubricating pump in the ICE is:
- 134.The purpose of the oil in the oil circulating system of the marine diesel trunk engine is to:
- 135.The reason for the wide use of copper in mechanical engineering is:
- 136.The reduction of the maximum fuel injection pressure during the main ship engine operation in maneuver modes is due to the
- 137.The reversal of the ICE is required when:
- 138.The safety valves of the Marine internal combustion engine are compulsory for cylinder bores equal and higher than
- 139.The ship engine's main starting valve is an element of
- 140.The speed of the Turbo compressor depends on the:
- 141.The state of the internal combustion engines can be determined by the color of the exhaust gas. Dark color means:
- 142.The steam turbine body is always manufactured with:
- 143.The telescopic pipes in some cross-head ship engines serve for
- 144.The temperatures of exhaust gases of a four stroke ship engine
- 145.The term coke number gives an idea on the propensity of fuels to:
- 146.The thermal and mechanical losses of the Main IC Engine are accounted for by:
- 147.The thrust created by the propeller is greatest when the slip speed of the propeller is:
- 148.The use of heat in the ideal cycle is characterized by:
- 149.Through which element of the starting air system of main ship engine is a restart performed with open compressed air bottles?
- 150.To achieve the best fuel combustion of the internal combustion engines, it is necessary to
- 151.To calculate the indicated power of the Marine internal combustion engine we need to measure:
- 152.To what extent should the coefficient of excess air be maintained in the slow-speed diesel engines?
- 153.Unlike exhaust valves, the suction valves of some Marine internal combustion engines can be fabricated from low-alloy steel, because:
- 154.Unlike the exhaust valves, the inlet valves of some of the Main internal combustion engines may be made from low alloy steel because:
- 155.Usually the high pressure lubrication system of the ship engine the number of oil pumps is
- 156.What actions are required at pH of boiler water <7?
- 157.What are the advantages of the automatic combustion control system for ship's steam boilers?
- 158.What are the main bearings of the main ship engine?
- 159.What are the main parameters of steam produced by ship steam boilers
- 160.What changes in the structure of the material from which gas turbine blades are made due to the high temperatures at which they operate
- 161.What could be the cause for Turbocharger surging?
- 162.What could be the reason for the black smoke from the exhaust gas funnel of the engine?
- 163.What determines the operating temperature range of oils?
- 164.What determines the operating temperature range of the oils
- 165.What determines the size of the cycle portion of the fuel / the plunger stroke length/ for the distributing type of the high pressure pump / BOSCH type /of the internal combustion engines?
- 166.What do we mean by theoretically required amount of air?
- 167.What does the "steam multiplicity factor" of boilers indicate?
- 168.What does the term "thermal valve clearance" mean with Marine internal combustion engines?
- 169.What does the residual gas coefficient take into account in main ship engine?
- 170.What does the system for regulation, control and protection of the main turbine unit provide?
- 171.What effect does the increased concentration of calcium in boiler water cause?
- 172.What fuel quality does the Cetane number determine?
- 173.What function is performed by the chemical treatment system of the sea cooling water?
- 174.What happens to the clearance when the main bearings of the ship engine wear out?
- 175.What happens to the hydrodynamic efficiency of an controllable pitch propeller at a constant pitch when increasing the RPMs?
- 176.What impact will the late fuel injection and the high exhaust gas temperature have on the Turbo compressor (TC) ?
- 177.What is the circulation with the fire tube boilers?
- 178.What is the condition for obtaining the load characteristics of a ship engine
- 179.What is the condition for obtaining the speed characteristic of a main ship engine using the smoke boundary
- 180.What is the distribution of the thermal load of the cylinder liner of the main ICE?
- 181.What is the main way to increase the efficiency of a gas turbine?
- 182.What is the meaning of "Straight flow steam boiler with multiplicity factor of circulation equal to one"
- 183.What is the name of the Marine internal combustion engine part, which supports the engine
- 184.What is the name of the measuring instrument for the Main steam turbine rotor speed?
- 185.What is the name of the treatment of steels at which they are heated to a certain temperature for a strictly defined period of time, held at that temperature and cooled at a certain speed?
- 186.What is the number of the main bearings relative to the number of cylinders in the engine?
- 187.What is the probable cause of the high exhaust gas temperature of one cylinder?
- 188.What is the probable reason of the bluish dark color of the exhaust gases from the main ship engine
- 189.What is the purpose of compensators in the steam pipelines?
- 190.What is the purpose of compensators in the steam pipelines?
- 191.What is the purpose of locking devices of the internal combustion engines reverse system?
- 192.What is the purpose of reading the mixed indicator diagram?
- 193.What is the purpose of separating the fuel for the ICE?
- 194.What is the purpose of the additional machining of the cylinder liners?
- 195.What is the purpose of the deaerator in the boiler feed water system?
- 196.What is the purpose of the screen tubes in the water tube Marine Steam Boiler?
- 197.What is the purpose of the steam turbine sealing system?
- 198.What is the purpose of the system for regulation, control and protection of the Gas Turbine Unit?
- 199.What is the reason for scaling in the steam boiler?
- 200.What is the relationship between the rpm and the efficiency for the gas turbines?