USCG Deck General – Question Bank Book 2 (BK2) — page 26
2627 questions with correct answers from the official USCG question bank (2008 edition), book 2. Pass mark 70%. Click a question to see its answer.
Take the full practice test →Free USCG practice test with the real pass mark, no sign-up- 2501.The securing of passenger cars on a Ro-Ro vessel requires __________.
- 2502.Which of the following is considered auxiliary securing equipment that provides extra reliability to lashing in Ro-Ro transport operations?
- 2503.The lashings used on Ro-Ro vessels should be capable of withstanding the forces of __________.
- 2504.The lashings used on Ro-Ro vessels should be capable of withstanding the forces of __________.
- 2505.The lashings used on Ro-Ro vessels should be capable of withstanding the forces of __________.
- 2506.Which variable factor affects the initial lashing requirements aboard Ro-Ro vessels?
- 2507.Which variable factor affects the initial lashing requirements aboard Ro-Ro vessels?
- 2508.Which variable factor affects the initial lashing requirements aboard Ro-Ro vessels?
- 2509.Which lashing device(s) would be used in securing heavy vehicles aboard Ro-Ro vessels?
- 2510.Which of the following lashing materials would be used in securing heavy vehicles aboard Ro-Ro vessels?
- 2511.Which lashing materials would be used in securing light vehicles aboard Ro-Ro vessels?
- 2512.Which lashing material is preferred when securing new cars aboard Ro-Ro vessels?
- 2513.What is used when securing light vehicles aboard Ro-Ro vessels?
- 2514.What is used when securing heavy vehicles aboard Ro-Ro vessels?
- 2515.What is used when securing light vehicles aboard Ro-Ro vessels?
- 2516.What may NOT be used when securing heavy vehicles aboard Ro-Ro vessels?
- 2517.An advantage of using chain lashing on heavy vehicles aboard Ro-Ro vessels is that it __________.
- 2518.A disadvantage of using chain lashing on heavy vehicles aboard Ro-Ro vessels is that it __________.
- 2519.A disadvantage of using chain lashing on heavy vehicles aboard Ro-Ro vessels is that it is __________.
- 2520.The disadvantage(s) of using chain lashing on heavy vehicles aboard Ro-Ro vessels is that __________.
- 2521.A disadvantage of using chain lashing on heavy vehicles aboard Ro-Ro vessels is that __________.
- 2522.The disadvantage(s) of using web lashing on light vehicles aboard Ro-Ro vessels is that it __________.
- 2523.What is/are the advantage(s) of using web lashing on light vehicles aboard Ro-Ro vessels?
- 2524.The advantage(s) of using wire rope lashing on vehicles aboard Ro-Ro vessels is that it __________.
- 2525.Which tensioning device is used with wire rope lashing to secure vehicles aboard Ro-Ro vessels?
- 2526.Which tensioning device is used with chain to secure heavy vehicles aboard Ro-Ro vessels?
- 2527.Which tensioning device is used with webbing to secure light vehicles aboard Ro-Ro vessels?
- 2528.Which of the following tensioning devices is used with webbing to secure light vehicles aboard Ro-Ro vessels?
- 2529.Which tensioning device is used with chain to secure heavy vehicles aboard Ro-Ro vessels?
- 2530.Which of the following statements is TRUE regarding lashing requirements to secure vehicles aboard Ro-Ro vessels?
- 2531.Which of the following is/are TRUE regarding lashing requirements to secure vehicles aboard Ro-Ro vessels?
- 2532.Which of the following statements is TRUE regarding lashing requirements to secure vehicles aboard Ro-Ro vessels?
- 2533.Which of the following statement(s) is/are TRUE regarding lashing requirements to secure vehicles aboard Ro-Ro vessels?
- 2534.What should you be concerned with when loading and securing vehicles on a Ro-Ro?
- 2535.What should you be concerned with when loading and securing vehicles aboard a Ro-Ro vessel?
- 2536.Which factor(s) should be considered when loading vehicles or trailers aboard Ro-Ro vessels?
- 2537.Which element(s) should be taken into account in the preparation of the "Cargo Securing Manual"?
- 2538.Which of the following element(s) should be taken into account in the preparation of the "Cargo Securing Manual"?
- 2539.Which of the following element(s) should be taken into account in the preparation of the "Cargo Securing Manual"?
- 2540.According to the IMO Code, what are the minimum number of securing points that should be on each side of a "road vehicle", whose gross vehicle mass is between 3.5 Tons and 20 Tons, when carried on Ro-Ro vessels?
- 2541.According to the IMO Code, what are the minimum number of securing points that should be on each side of a "road vehicle", whose gross vehicle mass is between 20 tons and 30 tons, when carried on Ro-Ro vessels?
- 2542.According to the IMO Code, what are the minimum number of securing points that should be on each side of a "road vehicle", whose gross vehicle mass is between 30 tons and 40 tons, when carried on Ro-Ro vessels?
- 2543.According to the IMO Code, what are the minimum number of securing points that should be on each side of a "road vehicle", whose gross vehicle mass is between 3.5 tons and 20 tons, when carried on Ro-Ro vessels?
- 2544.According to the IMO Code, what are the minimum number of securing points that should be on each side of a "road vehicle", whose gross vehicle mass is between 20 tons and 30 tons, when carried on Ro-Ro vessels?
- 2545.According to the IMO Code, what are the minimum number of securing points that should be on each side of a "road vehicle", whose gross vehicle mass is between 30 tons and 40 tons, when carried on Ro-Ro vessels?
- 2546.While loading or discharging vehicles, which is the most important safety consideration aboard a Ro-Ro vessel?
- 2547.What should be done after putting down the ramp on a Ro-Ro vessel, prior to loading or discharging cargo?
- 2548.What should be done before energizing the cargo hold ventilation on a Ro-Ro vessel, prior to loading or discharging cargo?
- 2549.What should be done immediately after putting down the stern ramp on a Ro-Ro vessel, prior to loading or discharging cargo?
- 2550.Which of the following is NOT necessary, prior to loading or discharging cargo on a Ro-Ro vessel?
- 2551.Which of the following actions are stated in the correct order prior to loading or discharging cargo on a Ro-Ro vessel?
- 2552.Which of the following actions are stated in the correct order prior to loading or discharging cargo on a Ro-Ro vessel?
- 2553.Which of the following actions are stated in the correct order prior to loading or discharging cargo on a Ro-Ro vessel?
- 2554.Which lashing gear used aboard Ro-Ro vessels should be painted or soaked in oil when not in use?
- 2555.Which of the following lashing gear used aboard Ro-Ro vessels should be maintained when not in use?
- 2556.Which of the following lashing gear used aboard Ro-Ro vessels should be stowed when not in use?
- 2557.How could lashing gear used aboard Ro-Ro vessels be stowed when not in use?
- 2558.How could lashing gear used aboard Ro-Ro vessels be stowed when not in use?
- 2559.Which of the following is the stated proper sequence before commencing cargo operations aboard Ro-Ro vessels?
- 2560.The most important safety consideration during loading or discharge aboard a Ro-Ro vessel is __________.
- 2561.Which of the following statements is/are TRUE concerning cranes being installed on the centerline of vessels?
- 2562.Which of the following statements is/are FALSE concerning cranes being installed on the centerline of vessels?
- 2563.Which of the following statements is FALSE concerning cranes being installed on the centerline of vessels?
- 2564.Which piece of equipment is required to "twin-up" 30-ton pedestal cranes aboard a crane vessel?
- 2565.Which piece(s) of equipment is/are required to "twin-up" 30-ton pedestal cranes aboard a crane vessel?
- 2566.Which piece of equipment is required to "twin-up" 30-ton pedestal cranes aboard a crane vessel?
- 2567.What is the purpose of the equalizing beam aboard a crane vessel?
- 2568.Pedestal cranes have limit switches to restrict the movement of which function?
- 2569.Pedestal cranes have limit switches to restrict the movement of which function?
- 2570.Pedestal cranes have limit switches to restrict movement of which function(s)?
- 2571.What is another name for the boom of a crane?
- 2572.What does a jib refer to on a crane?
- 2573.What does a jib refer to on a crane?
- 2574.The electrical components for each single crane are installed in its __________.
- 2575.What describes a tandem crane lift?
- 2576.What describes a twin crane lift?
- 2577.What is another description for a tandem crane lift?
- 2578.What is used to power modern pedestal cranes?
- 2579.Most pedestal crane power is provided by __________.
- 2580.Which safety precaution(s) should be observed during crane operations?
- 2581.It is the responsibility of the crane operator to, at all times, be aware of the location of the __________.
- 2582.What should be given, as a minimum, to personnel who are involved in crane cargo handling?
- 2583.What is the advantage of the tandem working arrangement of pedestal cranes when operating cargo?
- 2584.What is/are the advantage(s) of cranes over conventional cargo booms?
- 2585.What is meant by the term "luffing the boom" of a crane?
- 2586.What is meant by the term "level-luffing" a crane?
- 2587.What does "level-luffing" accomplish during crane operations?
- 2588.Which of the following statements is TRUE regarding crane operations?
- 2589.Which of the following statements is/are TRUE regarding crane operations?
- 2590.Which action(s) are included in crane operations?
- 2591.Which action(s) is/are included in crane operations?
- 2592.Which action(s) is/are included in crane operations?
- 2593.Which action(s) is/are included in crane operations?
- 2594.Which of the following statement(s) is/are TRUE regarding twin pedestal cranes?
- 2595.Which of the following statement(s) is/are TRUE regarding twin pedestal cranes?
- 2596.Which of the following statement(s) is/are TRUE regarding a twin pedestal crane set?
- 2597.Which of the following statement(s) is/are FALSE regarding a twin pedestal crane set?
- 2598.Which of the following statement(s) is/are TRUE regarding twin pedestal cranes?
- 2599.Which statement is TRUE regarding the operation of a crane?
- 2600.Which statement is FALSE regarding the operation of a crane?