USCG Deck General – Question Bank Book 2 (BK2) — page 11
2627 questions with correct answers from the official USCG question bank (2008 edition), book 2. Pass mark 70%. Click a question to see its answer.
Take the full practice test →Free USCG practice test with the real pass mark, no sign-up- 1001.Which of the following statements concerning the rigging of bosuns' chairs and their use is TRUE?
- 1002.When taking a Pilot from a pilot vessel in a seaway, which way should you head your vessel if the ladder is on the leeward side?
- 1003.As Master or person in charge, you must notify the U.S. Coast Guard if an injury leaves a crewman unfit to perform routine duties for more than __________.
- 1004.The system of valves and cargo lines in the bottom piping network of a tank vessel that connects one section of cargo tanks to another section is called a __________.
- 1005.A chock __________.
- 1006.Which of the following statements concerning the rigging and use of bosun's chairs is TRUE?
- 1007.When rigging a bosun's chair, a tail block or lizard is used to __________.
- 1008.Which statement is TRUE with respect to the elasticity of nylon mooring lines?
- 1009.To allow for the rise or fall in tide and for change in draft of a tankship during cargo transfer, cargo hoses must be suspended with __________.
- 1010.What is the purpose of the freeing ports on a vessel with solid bulwarks?
- 1011.A vessel puts into the port of Kobe, Japan, to discharge cargo. The vessel contracts a local shipyard to have the hull chipped and scaled. If the vessel provides the primer and paint, which statement is TRUE?
- 1012.What should you inspect to be sure that it is safe to go aloft in a bosun's chair?
- 1013.Nylon line can be dangerous because it __________.
- 1014.You are rigging a stage over the ship's side to serve as a working platform. For stability of the stage, the downhaul to one end of the stage and the downhaul to the other end, which are used for lowering the stage, should be led __________.
- 1015.A vessel is underway with a work stage rigged over the side. A seaman may work on the stage, but only when __________.
- 1016.You are rigging a stage over the vessel's side and are securing the downhaul with lowering turns at your end of the stage. When finished, the remainder of the line should be __________.
- 1017.Pinching of the cargo hose between the vessel and the dock should be prevented by __________.
- 1018.One function of a bulwark is to __________.
- 1019.A vessel sailing from Liverpool to New York puts into Boston, Mass. for emergency repairs. If no inward foreign cargo is to be discharged at that port, which of the following documents is required?
- 1020.What is an advantage of the 6X37 class of wire rope over the 6X19 class of wire rope of the same diameter?
- 1021.What type of stopper would you use on a nylon mooring line?
- 1022.On a single-screw vessel, when coming port side to a pier and being set off the pier, you should __________.
- 1023.The knot used to form the bridle at the standing part of a gantline rigged to a stage is a __________.
- 1024.A single fitting installed in a pipeline that either blanks off the pipe or allows a full flow passage of a liquid through the pipe is referred to as a __________.
- 1025.A stage should only be rigged __________.
- 1026.What should be readily available on deck while seamen are working over the side on a stage?
- 1027.Freeing ports on a vessel with solid bulwarks __________.
- 1028.On a transpacific voyage, you receive a message from your vessel's operators saying that your vessel has been consigned to Naval Control of Shipping. Further information is contained in __________.
- 1029.You are approaching a pier and intend to use the port anchor to assist in docking port side to. You would NOT use the anchor if __________.
- 1030.All entries in the Official Logbook must be signed by the Master and __________.
- 1031.The main function of a stripping system is to __________.
- 1032.The fittings used to secure a watertight door are known as __________.
- 1033.U.S. Customs, upon boarding a vessel desiring entry into a U.S. port, would inspect which document?
- 1034.To properly rig the downhaul to your stage for lowering, you must __________.
- 1035.The critical point in nylon line elongation is about __________.
- 1036.What equipment is customarily used when seamen are working on a stage rigged over the side of a vessel?
- 1037.Your vessel is to dock bow first at a pier without the assistance of tugboats. Which line will be the most useful when maneuvering the vessel alongside the pier?
- 1038.When lowering manropes alongside a stage rigged over the side of a vessel, they should be allowed to trail in the water __________.
- 1039.A vessel arrives in the port of Los Angeles from a foreign port and discharges some of its inward foreign cargo. What additional manifest is required?
- 1040.In a transversely framed ship, the transverse frames are supported by all of the following EXCEPT __________.
- 1041.A vessel has arrived in a U.S. port from a foreign voyage. Preliminary entry has been made. Formal entry at the U.S. Custom House must be made within how many hours after arrival (Sundays and holidays excepted)?
- 1042.The hitch used to secure the standing part of a gantline to the horns of a stage is a __________.
- 1043.When rigging a stage, the standing part should be fastened to the horns of a stage with which of the following hitches?
- 1044.You are on watch at night in clear visibility and the vessel has just been anchored. The first thing that you should do after the anchor has been let go is to __________.
- 1045.While your vessel is docked port side to a wharf, a sudden gale force wind causes the vessel's bow lines to part. The bow begins to fall away from the dock, and no tugs are immediately available. Which measure(s) should you take FIRST?
- 1046.You are on watch and the pilot has just anchored the vessel. The next thing that you should do after the anchor has been let go is to __________.
- 1047.The document which acknowledges that the cargo has been received and is in the carrier's custody is called the __________.
- 1048.You are on anchor watch. As an aid to preventing thievery on the vessel you should __________.
- 1049.In ship construction, frame spacing is __________.
- 1050.The term used in levying customs duties when such are fixed at rates proportioned to estimated value of goods concerned is __________.
- 1051.What affect does shallow water have on a vessel's stopping distance?
- 1052.Which line would be least likely to kink?
- 1053.In the context of shiphandling, what would be the definition of shallow water?
- 1054.The best time to work a boat into a slip is __________.
- 1055.What is a correct reply to a pilot's request, "How's your head"?
- 1056.A vessel loads 100 tons of glass jars. The mate on watch discovers that some of the cartons have been damaged and has an exception made on the Bill of Lading. What is this document called?
- 1057.Which product is most likely to accumulate static electricity?
- 1058.In a longitudinally-framed ship, the longitudinal frames are held in place and supported by athwartship members called __________.
- 1059.The document that the Master uses to attest to the truth of the manifest of cargo is called __________.
- 1060.How does a vessel's rate of turn change when entering shallow water?
- 1061.When piloting a vessel, how are visual references used to establish a constant rate of turn?
- 1062.Which type of line floats?
- 1063.The Muster List ("Station Bill") shows each person's lifeboat station, duties during abandonment, basic instructions, and __________.
- 1064.A vessel will "squat" when it proceeds underway __________.
- 1065.A vessel has completed loading cargo in the port of San Francisco. What document is signed by the Master stating the terms that goods were delivered and received by the ship?
- 1066.Transverse frames are more widely spaced on a ship that is designed with the __________.
- 1067.If you intend to land tulip bulbs from Holland in a U.S. port, they must be inspected by the __________.
- 1068.You are making a sharp turn in a channel and using a buoy four points on the bow to gauge your rate of turn. If you observe the buoy moving aft relative to you, what should you do?
- 1069.You are making a sharp turn in a channel and using a buoy four points on the bow to gauge your rate of turn. If you observe the buoy moving forward relative to you, what should you do?
- 1070.Compared to manila line, size for size, nylon line __________.
- 1071.You have arrived at your anchorage location. You have put the engines astern prior to letting go the anchor. How will you know when the vessel has stopped making way?
- 1072.You have arrived at your anchorage location. You have put the engines astern prior to letting go the anchor. How will you know when the vessel has stopped over the ground?
- 1073.A "Mediterranean moor" should be used when __________.
- 1074.A shipper of cargo aboard your vessel offers a letter of indemnity for the cargo. This is done in order to obtain a(n) __________.
- 1075.The most likely time for oil pollution while bunkering is when __________.
- 1076.The regulations require that inspected vessels on an international voyage, other than small passenger vessels, must carry which of the following distress signals on or near the navigating bridge?
- 1077.Uncleared crew curios remaining on board during a domestic coastwise voyage after returning from foreign should be __________.
- 1078.Your vessel must moor port side to a berth limited by vessels ahead and astern using a single tug. You are stemming a slight current and there is a light breeze of the dock. Your tug should be made up to the vessel's __________.
- 1079.Which towing equipment can be used to prevent the tripping of a tug?
- 1080.As shown, the mooring line labeled "C" is called a __________.
- 1081.Which term describes a rope in which three right-handed strands are laid up left-handed?
- 1082.You are taking the bow line from the port bow of a large vessel that is underway when the stern of your tug comes in contact with the vessel. The forward motion of both vessels causes your tug to be turned toward the other vessel and contact the stem thereby being "stemmed". You should immediately __________.
- 1083.An implied warranty of seaworthiness on the part of the vessel's owner lies in the __________.
- 1084.When bunkering is complete, the hoses should be __________.
- 1085.A normal safe working load for used nylon rope in good condition is __________.
- 1086.Which statement is TRUE about the use of a "gob rope"?
- 1087.A person has fallen overboard and is being picked up with a lifeboat. If the person appears in danger of drowning, the lifeboat should make __________.
- 1088.The main advantage of a Chinese stopper over the one line stopper is that it __________.
- 1089.What type of line melts easiest?
- 1090.Under the Carriage of Goods by Sea Act of 1936, a vessel will be liable for damage to a cargo when the damage arises from __________.
- 1091.You are landing a single-screw vessel, with a right-hand propeller, starboard side to the dock. When you have approached the berth and back the engine, you would expect the vessel to __________.
- 1092.The most probable position of the object of a search at any given time is the __________.
- 1093.Your vessel's operators send a message that your vessel has been consigned to Voluntary Naval Control of Shipping. The message will refer you to __________.
- 1094.When clearing customs for a foreign voyage, which of the following is processed at the custom's house and returned to the vessel?
- 1095.Under the Carriage of Goods by Sea Act of 1936, a vessel will be liable for damage to cargo when the damage arises from __________.
- 1096.Under defense plans, operation of electronic aids may be temporarily suspended with __________.
- 1097.You are landing a single-screw vessel with a left-handed propeller, starboard side to the dock. As you approach the dock you back your engine with your rudder amidships. You would expect the vessel to __________.
- 1098.The Tonnage Certificate indicates __________.
- 1099.When making a wire fast to bitts it is recommended that you __________.
- 1100.When cargo is being worked using a Burton or married fall system, which part of the cargo gear is most likely to fail?