USCG Deck General – Question Bank Book 2 (BK2) — page 19
2627 questions with correct answers from the official USCG question bank (2008 edition), book 2. Pass mark 70%. Click a question to see its answer.
Take the full practice test →Free USCG practice test with the real pass mark, no sign-up- 1801.You are using tackle number 7 to lift a weight of 100 lbs. If you include 10 percent of the weight for each sheave for friction, what is the pull on the hauling part required to lift the weight?
- 1802.What is the mechanical advantage of tackle number 7?
- 1803.You are conducting trials to determine the maneuvering characteristics of your vessel. While making a turn you take the ranges and bearings of an isolated light with the results shown. Based on this information, what is the transfer for a turn of 75°?
- 1804.What is the name of tackle number 3?
- 1805.The part of a windlass which physically engages the chain during hauling or paying out is the __________.
- 1806.You have determined the maneuvering characteristics of your vessel by taking the radar ranges and bearings of an isolated light while making a turn. The results are listed in illustration D035DG. Based on this data what is the tactical diameter of the turning circle?
- 1807.What is the mechanical advantage of tackle number 6?
- 1808.You have determined the maneuvering characteristics of your vessel by taking the radar ranges and bearings of an isolated light while making a turn. The results are as listed. Based on this data what is the transfer for a turn of 180°?
- 1809.You are using tackle number 10 to lift a weight. The hauling part of this tackle is bent to the weight hook (w) of tackle number 4. What is the mechanical advantage of this rig?
- 1810.You are conducting trials to determine the maneuvering characteristics of your vessel. While making a turn, you take ranges and bearings of an isolated light with the results as shown. Based on this information, what is the transfer for a turn of 90°?
- 1811.What is the name of tackle number 2?
- 1812.When referring to dry bulk cargoes, the term "flow state" __________.
- 1813.You are proceeding under NCS (Naval Control of Shipping) and wish to send a message concerning an initial enemy contact. Which precedence will you assign this message?
- 1814.A Chinese stopper (two lines) will hold best when you __________.
- 1815.On the fully containerized ship, approximately one-third or more of the cargo is on deck above the rolling center. Top stowed containers are subject to __________.
- 1816.After an explosion, repair of emergency machinery and services should be accomplished __________.
- 1817.Under normal weather and sea conditions when securing a stack of containers with twist locks, lashings are required when the tier exceeds what height?
- 1818.Certain cargoes must be segregated because of their __________.
- 1819.What is the mechanical advantage, neglecting friction, of tackle number 5?
- 1820.You have determined the maneuvering characteristics of your vessel by taking the radar ranges and bearings of an isolated light while making a turn. The results are listed in illustration D035DG. Based on this data what is the advance for a turn of 30°?
- 1821.You are using tackle number 6 to lift a weight. The hauling part of this tackle is bent to the weight hook (w) of tackle number 8. Disregarding friction, what is the mechanical advantage of this rig?
- 1822.You are conducting trials to determine the maneuvering characteristics of your vessel. While making a turn, you take ranges and bearings of an isolated light with the results as shown. Based on this information, what is the advance for a turn of 90°?
- 1823.Given a dry bulb temperature of 78°F and wet bulb temperature of 66.5°F, the dew point is __________.
- 1824.What is the mechanical advantage, neglecting friction, of tackle number 4?
- 1825.If reefer spaces are not properly cleaned prior to loading cargo, it will most likely cause __________.
- 1826.You are using tackle number 5 to lift a weight of 300 lbs. If you include 10 percent of the weight for each sheave for friction, what is the pull on the hauling part required to lift the weight?
- 1827.The load chart of a crane enables the operator to combine the load radius with boom length to determine the __________.
- 1828.You are using tackle number 5 to lift a weight. The hauling part of this tackle is bent to the weight hook (w) of tackle number 8. What is the mechanical advantage of this rig?
- 1829.What is the mechanical advantage of tackle number 3?
- 1830.You have determined the maneuvering characteristics of your vessel by taking the radar ranges and bearings of an isolated light while making a turn. The results are listed. Based on this data what is the transfer for a turn of 60°?
- 1831.You are using tackle number 5 to lift a weight. The hauling part of this tackle is bent to the weight hook of tackle number 9. What is the mechanical advantage of this rig?
- 1832.What is the name of tackle number 1?
- 1833.What is the mechanical advantage of tackle number 2?
- 1834.Keeping certain cargoes separated because of their inherent characteristics is known as __________.
- 1835.You are conducting trials to determine the maneuvering characteristics of your vessel. While making a turn, you take ranges and bearings of an isolated light with the results as shown. Based on this information, what is the advance for a turn of 75°?
- 1836.Another name for the garboard strake is the __________.
- 1837.What is the area of a circle with a radius of 12 feet after a sector of 60° has been removed?
- 1838.You are using tackle number 3 to lift a weight of 120 lbs. If you include 10 percent of the weight for each sheave for friction, what is the pull on the hauling part required to lift the weight?
- 1839.What is the mechanical advantage of tackle number 1?
- 1840.What is the area of a circle with a radius of 21 feet after a sector of 120° has been removed?
- 1841.You are using tackle number 4, as shown, to lift a weight. The hauling part of this tackle is bent to the weight hook of tackle number 11. What is the mechanical advantage of this rig?
- 1842.If you are loading fruit in reefer spaces and you notice that the fruit is beginning to mold, you should __________.
- 1843.To determine the number of certificated lifeboatmen required on a vessel, you should check the __________.
- 1844.Cargoes that might leak from containers are known as __________.
- 1845.A "wet cargo" refers to __________.
- 1846.You have determined the maneuvering characteristics of your vessel by taking radar ranges and bearings of an isolated light while making a turn. The results are as shown. Based on this data what is the transfer for a turn of 90°?
- 1847.What is the area of a circle with a radius of 17 feet after a sector of 57° has been removed?
- 1848.You are using tackle number 4 to lift a weight. The hauling part of this tackle is bent to the weight hook (w) of tackle number 10. What is the mechanical advantage of this rig?
- 1849.You are using tackle number 2 to lift a weight of 100 lbs. If you include 10 percent of the weight for each sheave for friction, what is the pull on the hauling part required to lift the weight?
- 1850.You are conducting trials to determine the maneuvering characteristics of your vessel. While making a turn, you take ranges and bearings of an isolated light with the results as shown. Based on this information, what is the transfer for a turn of 180°?
- 1851."Cribbing" is __________.
- 1852.You have determined the maneuvering characteristics of your vessel by taking radar ranges and bearings of an isolated light while making a turn. The results are as shown. Based on this data what is the advance for a turn of 90°?
- 1853.Cargo that gives off fumes that may contaminate other cargo is known as a(n) __________.
- 1854.The machinery associated with heaving in and running out anchor chain is the __________.
- 1855.When you "end for end" a wire rope, you __________.
- 1856.You are conducting trials to determine the maneuvering characteristics of your vessel. While making a turn, you take ranges and bearings of an isolated light with the results shown. Based on this information, what is the transfer for a turn of 45°?
- 1857.Your vessel has been damaged and is partially flooded. The first step to be taken in attempting to save the vessel is to __________.
- 1858.You are signing on a crew. You can determine the minimum number and qualifications of the crew that you are required to carry by consulting which document?
- 1859.What is the area of a circle with a radius of 4 feet after a sector of 111° has been removed?
- 1860.When inspecting wire rope before a hoisting operation, one must look for __________.
- 1861.You have determined the maneuvering characteristics of your vessel by taking radar ranges and bearings of an isolated light while making a turn. The results are as shown. Based on this data what is the advance for a turn of 60°?
- 1862.You will load and carry a bulk cargo of sulfur at ambient temperature. Which statement is true?
- 1863.In plugging submerged holes; rags, wedges, and other materials should be used in conjunction with plugs to __________.
- 1864.You are conducting trials to determine the maneuvering characteristics of your vessel. While making a turn, you take ranges and bearings of an isolated light with the results as shown. Based on this information, what is the advance for a turn of 45°?
- 1865.Your vessel has run hard aground in an area subject to heavy wave action. Backing full astern failed to free her. Which action should be taken next?
- 1866.What is the area of a circle with a radius of 2 feet after a sector of 86° has been removed?
- 1867.In determining the scope of anchor line to pay out when anchoring a small boat, one must consider the __________.
- 1868.Cargo that is highly susceptible to damage by tainting from odorous cargo is called __________.
- 1869.What will cause wire rope to fail?
- 1870.A seaman you have just discharged has a Continuous Discharge Book. Which statement is TRUE?
- 1871.The sprocket teeth on a wildcat are known as the __________.
- 1872.The biggest problem encountered when towing bridle legs are too short is __________.
- 1873.As defined in the regulations governing marine casualties a "marine employer" may be the __________.
- 1874.You are on a multiple-product chemical tanker and will carry cargoes of isophorone, ethylenediamine, and creosote. Which of the following is TRUE?
- 1875.In the stowage of deck cargo, "cribbing" is __________.
- 1876.In towing, chocks are used to __________.
- 1877.What is NOT required to be approved or certified by the U.S. Coast Guard before being used on inspected vessels?
- 1878.Which will cause a wire rope to fail?
- 1879.How do you determine the weight of the vessel that is supported by the ground when a vessel has run aground?
- 1880.In a national emergency, when communicating via the Navy, messages are sent by precedence. A message designated FLASH will be delivered within __________.
- 1881.Which splice is used to connect two separate lines together?
- 1882.A lookout can leave his/her station __________.
- 1883.Your vessel has run aground and is touching bottom for the first one-quarter of its length. What is the LEAST desirable method from the standpoint of stability to decrease the bottom pressure?
- 1884.Fittings used for towing must be __________.
- 1885.Which line cannot be spliced?
- 1886.When two lines are spliced together, __________.
- 1887.The grooved wheel inside a block is called a __________.
- 1888.How many tons of salt water can be loaded into a flat ended cylindrical tank with a diameter of 3 feet and a length of 8 feet?
- 1889.When securing a hook to the end of a wire rope you should use __________.
- 1890.An example of an anchor which has a stock is a __________.
- 1891.A splice that can be used in running rigging, where the line will pass through blocks, is a __________.
- 1892.What is the volume of a sphere with a radius of 11 feet?
- 1893.What is an advantage of having wire rope with a fiber core over that of a wire rope of the same size with a wire core?
- 1894.You are on a multiple-product chemical tanker and will carry cargoes of allyl alcohol, benzene, and propanolamine. Which of the following is true?
- 1895.What is the volume of a sphere with a radius of 7 feet?
- 1896.A temporary wire eye splice made with three wire rope clamps will hold approximately what percentage of the total rope strength?
- 1897.What is the area of a circle with a diameter of 12 feet after a sector of 86° has been removed?
- 1898.The recessed areas on a wildcat are called __________.
- 1899.Which mooring line prevents sideways motion of a vessel moored to a pier?
- 1900.What is the area of a circle with a diameter of 21 feet after a sector of 72° has been removed?