F3 Controlling the Operation — Management Level — Page 5
756 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 401.According to SOLAS II-2 (19),if in cargo spaces for carriage of dangerous goods is fitted electrical equipment without certificate under IEC 60092
- 402.According to SOLAS II-2 (19), if bulkheads forming boundaries between cargo spaces and machinery spaces are NOT insulated as per "A-60" class standard,
- 403.According to SOLAS II-2 (19), each open Ro-Ro space having a deck above it and each closed Ro-Ro space
- 404.IMDG Code word "may" means that the provisions concerned are
- 405.Transportable moisture limit is
- 406.According to the recommendations of IMO, in case of fumigation of cargo in transit, safety procedures are performed by
- 407.The tanker without inert gas system, what shall the atmosphere in the tank be during washing?
- 408.On a tanker with inert gas system, what shall the atmosphere in the tank be during washing?
- 409.At the time of unloading what minimum pressure of the IG must be maintained in the cargo tanks?
- 410.Oil record book (part 2) is required for oil tankers of
- 411.During the cargo operations with oil, tankers
- 412.A chemical additive to LPG (liquefied petroleum gas) gives it a specific
- 413.SOLAS, Chapter XII, Reg 11 "Loading instrument" refers to the
- 414.The Code for the safe loading and unloading of bulk carriers, BLU Code
- 415.The requirement for a "Solid bulk cargo density declaration" derives from the
- 416.The interval between sampling for transportable limit of humidity and the loading of the cargo which may liquefy must not exceed
- 417.Information on the moisture content of the cargo and the maximum allowable one during transport is derived from
- 418.Некохезивните насипни товари с "angle of repose" ≤ 30˚ се превозват според правилата на
- 419.The non-cohesive bulk cargoes with the "angle of repose" ≤ 30 ° are carried in accordance with the rules of
- 420.The non-cohesive bulk cargoes are divided by "angle of repose" into
- 421.Carriage of goods from group "A" of the IMSBC Code with a moisture content greater than "transportable moisture limit" is allowed with
- 422.Owner's Inspection Report for damage to bulk carriers cargo spaces, takes place in the manual in
- 423.Document of Compliance is the ship's certificate required by
- 424.IGNITION TEMPERATURE is the temperature at which
- 425.IMDG Code the word "shall" means that the provisions concerned are
- 426.In a Document of compliance for carriage of dangerous cargo, according to IMO, it is compulsory to
- 427.Declaration of cargo (Cargo Declaration)
- 428.What is the name of dangerous cargo that should be stated in the documents?
- 429.Volatile liquids are liquids with a flash point below
- 430.For transportation of hazardous cargo (except class 1), when is segregation to the engine room not required?
- 431.For the transport of dangerous goods (DG) in the Cargo Transport Units (CTU), placement of labels for hazardous cargo is required
- 432.Flashpoint is called the temperature at which the liquid
- 433.Subsidiary Risk label of dangerous cargo acts as an extra and is
- 434.The term Away from is used for segregation of dangerous goods in a cargo space and means
- 435.The goods in Group "B" of the IMSBC CODE are
- 436.The purpose of the trimming procedures according to the IMSBC Code is
- 437.„Document of authorization” is required by
- 438.Ship without "Document of authorization" on the requirements of the SOLAS Ch VI Part "C"
- 439.During the preparation of the cargo holds for loading of grain in bulk, bilge covers shall be covered with burlap to
- 440.According to the map of zones and seasonal areas in the LL '66 Convention, Black Sea
- 441.According to the Convention LL'66 "Length between perpendiculars" is defined as
- 442.The term Allowance in the Convention LL' 66 is
- 443.Besides the new GT and NT, may the older BRT and NRT be used?
- 444.Moulded Depth –(D) is the depth of the side in middle
- 445.The Moulded draught
- 446.The map of zones and seasonal areas in the Convention ' 66 LL indicates the load line limits of the ship's draught
- 447.Where is the minimum content of the Cargo Information described?
- 448.The term Consignee in the Cargo Information
- 449.The term Shipper In the Cargo Information
- 450.Weathering Certificate is
- 451.There are no special requirements for vessels carrying dangerous goods, prescribed by the SOLAS Convention for
- 452.In the description of the dangerous cargo "UN 1098 ALLYL ALCOHOL 6.1 (3) I (21°C c.c.) the figure (3) means
- 453.According to the CSS Code, SWL means
- 454.According to the Convention, LL ' 66 ships of type B-60 are
- 455.MARPOL Convention concerning the carriage of packed dangerous goods in
- 456.Special requirements for ships carrying dangerous goods are described in
- 457.Special requirements for ships carrying dangerous goods require a type A-60 bulkhead
- 458.IMO issues the IMDG Code
- 459.New editions of the IMDG Code shall enter into force
- 460.In the IMDG Code, the term "High consequence dangerous goods" means
- 461.Handling class 7, according to the IMDG Code, individual monitoring is required
- 462.Where is the list of prohibited for carriage by IMDG Code items?
- 463.The term "Cargo Transport Unit (CTU) means
- 464.Dangerous goods are divided into classes according to
- 465.What does the term "Not Otherwise Specified-N.O.S."?
- 466.According to the IMDG Code, for dangerous goods outer packaging (no sacks) are subjected to a Stacking test with test pressure
- 467.According to the IMDG Code, the producer of external packaging for dangerous goods must attach a type approval certificate from a register or other recognized organization
- 468.Packing packing - group I, group II and III refer
- 469.What is the Proper Shipping Name (PSN) of dangerous good according to the IMDG Code?
- 470.According to the IMDG Code in "Dangerous Cargo Declaration," the name of the cargo
- 471.According to the IMDG Code, technical name of dangerous cargo
- 472.1 GHz is equal to
- 473.1MHz is equal to
- 474.What routine procedures should be performed before the initiation of hot work?
- 475.MMSI of the vessel can be found in the
- 476.In area A1 "Transmission of ship to shore distress alerts" is based mainly on the
- 477.The officer in charge of a navigational watch must
- 478.Fire-fighting equipment must be
- 479.You have received a nine-digit MMSI of the vessel on your DSC equipment. In what publication you will find the name of the ship?
- 480.Rules for limitation of ship owner's liability shall not apply
- 481.Fire-fighting equipment must be
- 482.If you are responsible for fire-fighting group, how many people wearing breathing apparatuses are you going to let in a smoke-filled compartment at least:
- 483.In a smoke-filled passage, where is the clean air and how we need to go out?
- 484.You're on watch on the bridge during night time, on a ship in passage, as navigation officer, when a fire in the seafaring mess room was reported. What is the first thing you need to do?
- 485.While you are in the machinery room you hear the alarm to activate the CO2 system, what should you do?
- 486.There is an indication on the fire alarm system for fire in the cargo hold with general cargo. What is the first thing you need to do?
- 487.What measures should be taken against the formation of flammable gases on the surface of a coal cargo.
- 488.Fire-extinguishing systems are the following.
- 489.The solid water jet, in a situation of oil products extinguishing shall be used for:
- 490.Steam extinguishing is most effective when extinguishing fires in
- 491.The possibility of a fire is determined by the simultaneous presence of
- 492.Structural fire protection involves the separation of
- 493.What kind of material is used for the signal wire of the fireman?
- 494.The effect of the action of the water on the fire increases, if used
- 495.Water system for Ro-Ro spaces shall provide to each point of the space
- 496.Fire system must provide for any part of the ship at least
- 497.The most popular and accessible means of firefighting on ships is
- 498.In a fire in the kitchen, electrical installation, navigational and other equipment under voltage power, the most appropriate means for extinguishing is
- 499.What is the way to guide a foam jet against horizontal surfaces on fire?
- 500.What is the requirement for the ventilation shut-off of the living spaces, cargo spaces, machinery room, offices and control posts?