F5 Electrical Engineering — Operational Level — Page 2
256 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 101.The contactor is a control device with two stable positions (on and off) whose emergency actuation is:
- 102.The current setting of maximum switch current is:
- 103.The dependence of the motor torque M on the rotor speed of asynchronous motors /M = f (n) / is called:
- 104.The dependence of the motor torque M on the rotor speed of induction motors /M =f(n)/ is called:
- 105.The dielectrically strength is:
- 106.The earthling of the electric motor is defined as the connection between of the body of the motor and
- 107.The electrical appliance that most commonly uses the principle of electromagnetic induction is:
- 108.The electrolyte in alkaline batteries
- 109.The electrolyte of alkaline batteries is a solution of
- 110.The electrolyte of lead batteries is
- 111.The factor determining the frequency Hz of the AC generator is:
- 112.The fixed (unmovable) parts of an asynchronous motor are called:
- 113.The frequency of the voltage of the working Diesel Generator depends on
- 114.The group of the connection of a three-phase transformer is a number from 0 to 12, determined by
- 115.The increase in the air gap between the rotor package and the poles of a DC machine causes:
- 116.The limit switches in the drive control of the trolley bridge crane are designed to:
- 117.The magnetic core of the transformer
- 118.The metal body of the electrical machines is mandatorily earthed
- 119.The motor roars loudly. The stator winding is uneven. Possible reasons?
- 120.The oscilloscope is a instrument with which you can observe the variation of:
- 121.The performance characteristics of induction motors are the graphical dependence of: the rotor speed n, the motor torque M, the power factor cos φ and the efficiency η from:
- 122.The power that is lost in heat in the coils when current flows through them is known as:
- 123.The protection of a synchronous generator from low voltage is performed by means of:
- 124.The purpose of compensating coils for synchronous motors is:
- 125.The regulatory characteristics of synchronous generators show:
- 126.The silicon rectifier is device that is used to change:
- 127.The speed of rotation of the rotor of an asynchronous electric motor is
- 128.The thermal overcurrent protection cannot be reset after shutdown because:
- 129.The transformation ratio can be:
- 130.The transformer core is:
- 131.The transformer is functioning normally with 220V AC. What will happen if we connect the transformer to 110V DC?
- 132.The transformer windings are made of:
- 133.The transmission of electrical signals between two electronic devices is performed by galvanic separation. For this purpose are used:
- 134.The winding of the additional poles is electric machines is connecting
- 135.Transformer windings are made of
- 136.Transformers are powered by networks for?
- 137.Unloaded transformers operate at:
- 138.We have Squirrel cage rotor when
- 139.What additional requirements do ship electrical machines have to meet compared to those onshore?
- 140.What are the advantages of using contactors for control of electric drives?
- 141.What are the separators between the battery panels?
- 142.What are your first actions at Black-Out?
- 143.What changes in the operation of the "Emergency Alert System" when switching from "watch" to "duty free" service?
- 144.What characterizes the high frequency chokes?
- 145.What connection scheme is obtained when the ends of the phase windings are connected at a common point?
- 146.What could be the probable cause for the rapid formation of oxides on the terminals of an acid battery?
- 147.What current in ampere (average) will pass through a diode in a three-phase uncontrolled rectifier if the load current is 60 (A)?
- 148.What determines the mode (generator or motor) of a synchronous generator if it is connected to AC buses?
- 149.What determines the power factor cosφ of a generator in single operation, connected to the busbars?
- 150.What determines the power factor cosϕ of a generator which is working alone and is powering the Main switchboard
- 151.What do we mean by "overcharging" of alkaline batteries?
- 152.What does reactance represent in AC circuits?
- 153.What does the capacity of the capacitor not depend on?
- 154.What does the abbreviation "Hz" stand for?
- 155.What does the mechanical loss of the motors not depend on?
- 156.What does the reactance represent in AC circuits?
- 157.What happens if the coils/windings of the electromagnetic brake of the cargo crane burn?
- 158.What happens if a shunt or independent excitation motor continues to run when its excitation circuit is interrupted?
- 159.What happens if the star-delta starter does not switch the stator windings of the pump driven by induction motor into a delta circuit?
- 160.What is a microprocessor controller?
- 161.What is a Synchronous Compensator (SC) and what application does it have?
- 162.What is characteristic of high frequency inductors?
- 163.What is characteristic of rough synchronization of the synchronous generator?
- 164.What is common in the principle of operation of the induction motor and transformer with an air gap?
- 165.What is the "skin effect" in the conductors?
- 166.What is the advantage of DC motors, due to which they are still widely used in practice?
- 167.What is the basic advantage of autotransformers?
- 168.What is the correct sequence of operations that the SRC (System for Remote Control) will carry out in an emergency with defined automatically controlled mechanisms?
- 169.What is the definition of 1C (one Coulomb)
- 170.What is the difference between generator circuit breakers and installation circuit breakers?
- 171.What is the function of I/P transducer
- 172.What is the main cause of short circuits?
- 173.What is the main characteristic of the semiconductor P / N transition?
- 174.What is the most economical way to change the rotation frequency of an asynchronous electric motor?
- 175.What is the most economical way to change the speed of an asynchronous electric motor?
- 176.What is the practical way to see if a motor is overloaded:
- 177.What is the purpose of a permanent magnet in the handset microphone?
- 178.What is the purpose of introducing a delay in the operation of the generator circuit breaker in the event of a short circuit
- 179.What is the role of the armature reaction in DC generators?
- 180.What kind of instrument can measure the insulation resistance of marine electrical equipment?
- 181.What of the following is not required for AC generators synchronization?
- 182.What protection is intended to protect the human body from electric shock?
- 183.What sensor is used to measure the effective torque of the DG?
- 184.What speed do we call synchronous speed in asynchronous machines?
- 185.What type of charging of alkaline batteries is used only in case of emergency?
- 186.What values of electrical quantities (U,I,P) are displayed by the measuring instruments on the switchboard if the ship's electrical equipment is for direct current
- 187.What will happen if a DC voltage of the same value is applied to the coil of an AC device?
- 188.What will happen if the braking winding of electrical winch has burned.
- 189.What will happen if the mooring motor cover for ventilation does not open?
- 190.What will happen in case of a phase insulation breakthrough to the housing of an electrical machine connected to a three-phase grid without a protective neutral conductor and without an insolated star center
- 191.When changing the RPM of multispeed asynchronous electrical motor, what is changed
- 192.When does an asynchronous motor not develop torque?
- 193.When does the capacity of the batteries change?
- 194.When preparing the main switchboard for electricity receiving, what action will we take first?
- 195.When the acid batteries are discharged and charged, the electrolyte:
- 196.When the load is fully active, the armature reaction of the synchronous generators is called:
- 197.When you try to start an asynchronous motor, it only buzzes and does not turn. What should be done?
- 198.Which asynchronous motor protection is also called "self-start protection"?
- 199.Which electric power is measured (VA)?
- 200.Which electrical machines are used as main energy sources?