F5 Electrical Engineering — Operational Level
256 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 1.Which speed of rotation in asynchronous machines do we call synchronous?
- 2.A synchronous generator is working in parallel with the power grid with power factor equal to 1. What will happen if we increase the excitation of the generator
- 3.A transformer is a static electromagnetic machine with two or more inductively coupled windings and is used to convert:
- 4.According to electrostatics, which of the listed is the carrier of electrical energy?
- 5.Armature reaction of synchronous generators depends on:
- 6.At the loading of the transformer is change:
- 7.At what density of the electrolyte of the alkaline batteries the charge must be stopped?
- 8.At what point will we turn on the automatic air circuit breaker of a generator to connect it in parallel to the busbars of the main switchboard?
- 9.Before we take out of parallel a running generator, its active power should be reduced using
- 10.Brushless generators are designed to work without:
- 11.By changing the phase alternation / exchange of two of the three terminals of the armature winding of the induction motor, we obtain:
- 12.By changing the phase sequence of two of the three terminals of the stator winding of the asynchronous motor is obtained:
- 13.Can a motor operation in continuously running mode to be used for a short-time operation mode or a repeated short-time operation mode?
- 14.Can simple fuses protect the electric motor from overloading
- 15.Circuit breakers can be used to protect motors from:
- 16.Cleaning of the commutator is done by
- 17.Commutator cleaning is performed when:
- 18.Connection of three-phase windings in a "STAR" scheme is marked with the sign:
- 19.Dielectric strength is:
- 20.Direct current flowing through a wire wound around a soft iron core is a simple description of:
- 21.Does the magnetic flux in the magnetic system of the DC electromagnet depend on the value of the air gap?
- 22.Due to what reasons is voltage drop observed in the ship's power grid?
- 23.During paralleling two generators, when the rotation of the synchroscope pointer slows down its speed and stops, this means that
- 24.During discharging and charging of acid batteries the electrolyte:
- 25.During the passage of the ship at sea, the temperature signaling of one of the diesel generators is blocking. What will be the immediate action?
- 26.Electric propulsion motors are commonly
- 27.Farad is a unit of dimension for:
- 28.For getting a higher maximum output current we connect battery cells in
- 29.For which battery cells discharging to less than 1.1 V is safe (voltage is measured when the cell is loaded)
- 30.For which of the following systems will we install a PID controller?
- 31.From where is the emergency lighting powered?
- 32.How are the rpm of a DC motor controlled?
- 33.How battery charge to properly monitored?
- 34.How can the algorithm of operation of a microprocessor control system be changed?
- 35.How can three-phase transformer windings be connected?
- 36.How can we tell that an electric motor is overloaded
- 37.How do the clearances in the lever system between the speed governor and the fuel rack affect the system?
- 38.How do we define a digital signal?
- 39.How do we define apparent power in electrical circuits
- 40.How is a DC motor reversed?
- 41.How is an automatic load distribution performed between operating AC generators, connected in parallel ?
- 42.How is automatic load distribution performed between DC power generators running in parallel?
- 43.How is the magnitude of the magnetic flux in the transformer core changed as the load current increases?
- 44.How is the sequence of the phases changed in three phase power systems?
- 45.How much is the maximum deviation of the sine wave of the voltage in the generator stator
- 46.How much is the minimum insulation resistance of the ships electrical grid
- 47.If generators Nos 1 and 2 operate in parallel and prime mover of generator No 2 runs out of fuel, what will happen?
- 48.If are connected in parallel two identical transformers with different voltages of short-circuit, what will happen?
- 49.If one of the two generators running in parallel at 80% load fails, what will be our immediate action?
- 50.If the speed of the running synchronous diesel generator falls by 10% due to a problem in the regulator what consequences, will there be for the electric motors working at the moment?
- 51.If the speed of the synchronous motor-generator connected to the buses drops by 10% due to a problem in the regulator, what would be the impact over the currently working electric motors?
- 52.Impedance is affected by the variation of:
- 53.In case the primе mover is damaged, the AC generator is protected against operation as a motor by:
- 54.In how many minutes should the alarm for exceeding the parameter value be acknowledged in order not to activate the overall signaling of the ship?
- 55.In microprocessor systems, information is presented:
- 56.In what limits is the time delay in generator's breakers at external short circuits?
- 57.In which cases are three-phase asynchronous motors with twin-cage rotors used in marine propulsion?
- 58.In which cases is it preferable to use synchronous motors?
- 59.In which electrical machines the inductor is located on the rotor and is supplied from a DC source.
- 60.In which of the cases of starting of the synchronous motors a separate electrical source is needed?
- 61.In which of the following types of equipment the electromotive force and the currents are changing by sinusoidal law?
- 62.Incandescent lamps are lights are classified by
- 63.Incidental low resistance with unusual high current flow is also known as
- 64.Increasing the excitation of the generator of diesel electric propulsion system will cause the DC propulsion motor to:
- 65.Increasing of the air gap between the rotor and stator causes
- 66.Is there a fault current protection in the ship's power plants and the ship's electrical equipment?
- 67.Is there a transformer with only one coil / primary / from which a voltage terminal is drawn?
- 68.Is there a transformer with only one winding from which you have voltage output?
- 69.Lead battery electrolyte is:
- 70.Linear contactors can protect motors from:
- 71.Lm (lumen) is the measuring unit for
- 72.Logic circuit has signals with
- 73.Most rectifiers operate at:
- 74.Moving parts of the asynchronous motor are called
- 75.Nickel-cadmium battery electrolyte is distilled water and:
- 76.Not loaded transformers work with
- 77.Operational amplifiers are used:
- 78.Output voltage 440V of AC generator is maintained by:
- 79.Overload protection of the steering gear electrical motors affects
- 80.Parallel work of transformers is needed in the case of
- 81.Proper point of switching on of the generator during synchronization is when the arrow of the synchroscope is in the position "11 hours" to "12 hours" due to:
- 82.Reactive power, which is generated by the generator in the power grid is controlled by
- 83.Regulating characteristic is characteristic of:
- 84.Regulatory characteristics of synchronous generators show:
- 85.RPM of asyncrhonous electrical motors In comparison of the rpm of the rotating magnetic field are
- 86.Ship's electrical consumers are protected from
- 87.Silicon diodes used in electronic voltage regulators and exclusively used for monitoring the voltage during reverse power mode are called
- 88.Solar cells are a source of:
- 89.Synchronous generator is working in parallel with the power grid with power factor equal to 1. What will happen if we increase the excitation of the generator?
- 90.Synchronous motors are used for:
- 91.The acid battery electrolyte density is 1.28. How much of its nominal capacity (in percent) can be relied upon when diluted?
- 92.The active power is distributed between the AC generators operating in parallel by adjusting:
- 93.The armature reaction in DC machines is:
- 94.The armature reaction of synchronous generators depends on:
- 95.The batteries are used for
- 96.The coefficient of transformation is a number which shows
- 97.The coil for the additional poles is connected
- 98.The commutator is a set of copper plates connected to the stator winding elements and isolated from each other by:
- 99.The compensating winding of DC machines is applied to:
- 100.The connection of three-phase windings in "delta" scheme is indicated by the sign: