F2 Maintenance and repair — ETO (CMKE, Poland)
326 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 1.Voltage transformers are used for:
- 2.A voltage transformer connects with the meter:
- 3.Current transformers are used for:
- 4.AC current network present on a vessel with the voltage above 1,000 V is:
- 5.A basic network of the IT type consists of:
- 6.A network of the TN-C type consists of:
- 7.A network of the TN-S type consists of:
- 8.Portable electrical devices shall have at least:
- 9.An S1 symbol on the name plate means:
- 10.An S2 symbol on the name plate means:
- 11.An S3 symbol on the name plate means:
- 12.An IP symbol informs of:
- 13.Light sources which do not require stabilization and ignition systems are called:
- 14.A compact fluorescent lamp, when compared with the traditional light bulb:
- 15.Which lights source is characterised by the lowest durability:
- 16.The parameter which characterises the luminous flux density is called:
- 17.Lighting intensity is measured in:
- 18.A fluorescent lamp is composed of:
- 19.The commutator in the motor serves for:
- 20.The rings in an induction motor serve for:
- 21.Which of the following is used for the description of motor operation:
- 22.The operation of a generator can be described by:
- 23.A separately excited motor:
- 24.A series-wound motor:
- 25.The transformer is composed of:
- 26.The ratio of a transformer is:
- 27.The operation of a transformer is based on:
- 28.Idle run of a transformer means:
- 29.If UP=100 V, UW= 200, the ratio of a transformer totals:
- 30.If the number of windings in the primary winding z1=500, the number of windings of the secondary winding z2=100, then the ratio totals:
- 31.Symbol Yd on a transformer means:
- 32.A three-phase transformer operates on the basis of:
- 33.The rotor of the squirrel cage motor is:
- 34.The rotor of a wound-rotor motor is:
- 35.The rotor of the squirrel cage motor is:
- 36.The rotor of a wound-rotor motor:
- 37.Synchronous speed is:
- 38.Synchronous speed can be calculated on the basis of the following formula:
- 39.When p=4, f=60, synchronous speed totals:
- 40.The change of rotation direction of an asynchronous motor occurs through:
- 41.The slip in an asynchronous motor is:
- 42.Asynchronous motors during start-up:
- 43.A contactor is a device used for:
- 44.A contactor contains the following main elements:
- 45.Safety fuses provide:
- 46.Compound-type voltage regulator:
- 47.The selection of the cross sections of feeder cables shall take into account:
- 48.Selectivity of protections means:
- 49.A residual current device:
- 50.In a brushless generator, a rotating rectifier:
- 51.The Meyer’s system ensures:
- 52.Generator reactive power regulator is:
- 53.The insulation condition control system:
- 54.The distribution of active power upon parallel operation of generators:
- 55.The distribution of reactive power upon parallel operation of generators:
- 56.Generator directional protection prevents:
- 57.Generator undervoltage protection prevents:
- 58.Residual current devices can be used:
- 59.An isolation transformer:
- 60.An isolation transformer:
- 61.Indirect climatic hazards to which electrical apparatuses are exposed on a vessel include:
- 62.The value of alternating or constant voltage, applied from time to time to metallic elements of the tested device (cable) with the view to verifying the correctness of execution of insulation layers corresponds to:
- 63.Electric strength of apparatus insulation depends primarily on:
- 64.Allowable long-term temperature of class B insulation is [in oC]:
- 65.Complete the sentence: “Electric strength of electrical devices insulation has to be checked during […….] minutes by means of RMS alternating, sinusoidal test voltage with the frequency of 50Hz.”
- 66.Earth-leakage relay must be used in the following networks:
- 67.A short-circuit occurs when:
- 68.On the basis of the path of the short-circuit current, the following types are distinguished:
- 69.If short-circuit current can flow through an electrical apparatus and it does not lead to exceeding the maximum temperature during n-seconds, such current is called:
- 70.The quantity of heat emitted by the device is described by the following formula: Q = I · R · t
- 71.Contacts are divided into:
- 72.The flow of electric current in gas is possible due to the phenomenon of:
- 73.In practical solutions of connector extinguishing chambers one or a number of simultaneous phenomena are used, speeding up the de-ionisation processes of the post-arc column, such as:
- 74.The breakers are apparatuses which serve among others for:
- 75.The main components of circuit breakers are, among others:
- 76.The delay time setting range of a short-time delay short-circuit component of circuit breakers totals:
- 77.The main operating categories of contactors are divided into:
- 78.A thermal bimetallic relay overloaded with the current of 1.05 In in compliance with the standard shall be activated after:
- 79.The characteristics which are used in the analysis of the selective operation of fuses are:
- 80.The limited fuse current is:
- 81.The protection shall comply, among others, with the following requirement:
- 82.According to the requirements of the Polish Register of Shipping (PRS), the batteries should be protected against:
- 83.External resistance of lead-acid batteries depends on:
- 84.Fluid losses in the electrolyte of lead-acid batteries shall be replenished with:
- 85.Which of the following is released when charging an alkaline battery:
- 86.Emergency lighting lamps shall be marked in:
- 87.Detailed requirements concerning signalling and position lamps are contained in:
- 88.A current transformer is a single-phase transformer operating permanently in:
- 89.Transformers are divided into the following types on the basis of their intended use:
- 90.The error of a current transformer increases with:
- 91.The maximum permitted storage temperature for frozen products shall be:
- 92.Too low air humidity in the frozen products' chamber may cause:
- 93.The recommended air parameters for seagoing vessels in rooms with heat release at workstations in summer for the tropical shipping area are as follows:
- 94.Steam cooling circuit is executed in a system of sequentially running machines and apparatus:
- 95.Left-handed refrigeration circuit is a set of sequentially running thermodynamic transformations:
- 96.The theoretical cooling efficiency ratio ε of the Linde comparative circuit is expressed by the equation:
- 97.The cooling agent R404A is a long-term replacement for the following cooling agent:
- 98.One of the causes of too low evaporation and condensation pressure may be:
- 99.The ODP abbreviation means:
- 100.The causes of knocks in the compressor and noisy operation can be: