F2 Cargo Handling — Operational Level (OOW)
297 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 1.Gross Tonnage (GT), gives us an idea of the
- 2.Notice of Readiness (NOR) is forward
- 3.Transportable moisture limit is
- 4.Which parameter has no effect on the size of the correction of GM for the presence of free surfaces?
- 5.How many TEU contain in a 40 feet freight container?
- 6.Freight Containers in excess of the indicated on the plate the maximum gross weight
- 7.Which of the following is the number identifying the container?
- 8.The maximum permissible load of the container is showed in
- 9.Supervision of technical condition of freight containers in exploatation is performed
- 10.When loading on a limited draught condition, the ship will load maximum quantity of cargo upon completion
- 11."Cargo Securing Manual" is required for
- 12."ANGLE OF REPOSE" is characteristic of
- 13."ANGLE OF REPOSE" means
- 14."STOWAGE FACTOR" means
- 15.In a river cargo port the limit load line is defined by the Convention on load lines in force, respecting the
- 16.The influence of free surface on stability is determined by the ratio between the sum of the moments of free surfaces and
- 17.Which ships should have "Stability information"?
- 18.Which factor has a major impact on the size of the correction of GM for free surfaces?
- 19.The line across the circle of Plimsoll, means summer load line to the
- 20.Cargo Securing Manual трябва да бъде одобрен от
- 21.Under the code of the IMO for securing of cargo (CSS Code) "Maximum Safe Load" MSL "-and Calculated Strength"- CS are in ratio
- 22.Under the code of the IMO IMO for securing of cargo (CSS Code) -Rule of-thumb method requires horizontal securing facilities to withstand the "maximum safe load"- MSL
- 23.The maximum height, 1/3 width of the ship, on a timber deck cargo refers to the
- 24.For the transport of timber on deck at the end of the voyage ships stability
- 25.IN RESPECT OF THE CARRIAGE OF TIMBER DECK WITH A NON-SPECIAL SHIP METACENTRIC HEIGHT MUST BE AT LEAST
- 26.When the load timber deck, stanchions are required
- 27.SOLAS, Chapter XII, Reg 11 "Loading instrument" refers to the
- 28.SOLAS, Chapter XII, Reg 12 "Hold, ballast and dry space water level detectors", refer to
- 29.SOLAS, Chapter XII, Reg 13 "Availability of pumping systems", refer to
- 30.What regulates the SOLAS, Chapter XII.
- 31.The code for the safe loading and unloading of bulk carriers, BLU Code
- 32.The implementation of the "Loading/Unloading Plan" requires periodically determine the mass of the cargo
- 33.The Code for the safe loading and unloading of bulk carriers, BLU Code
- 34.IMO Code for the safe loading and unloading of bulk carriers (BLU Code) requires
- 35.International Maritime Solid Bulk Cargoes Code
- 36.The requirement for a "Solid bulk cargo density declaration" derives from the
- 37.The interval between sampling for transportable limit of humidity and the loading of the cargo which may liquefy must not exceed
- 38.Information on the moisture content of the cargo and the maximum allowable in such maritime transport is derived from
- 39.What is the approximate content of oxygen in the atmosphere?
- 40.Non cohesive bulk cargoes with the "angle of repose" ≤ 30 ° are carried in accordance with the rules of
- 41.Non cohesive bulk cargoes is divided by "angle of repose" into
- 42.Carriage of goods from group "A" of the IMSBS Code with a moisture content of greater than "transportable moisture limit" is allowed by the
- 43.In respect of the carriage of coal, which of the following actions is applicable?
- 44.When loading bulk cargo on multi-deck ships tween decks covers are closed if
- 45.The purpose of the trimming procedures according to the IMSBC Code is
- 46.Document of authorization is required by
- 47.The allowed conventional static heel, from the shifting of the grain, as requires of the IG Code is
- 48.Why in the IG Code, the remaining area from the diagram of static stability is called the Residual dynamic stability?
- 49.Requirements of the IG Code for the carriage of grain in bulk refer to
- 50.Ship without "Document of authorization" as per the requirements of the SOLAS Ch VI Part "C"
- 51.Ship's certificate, "Document of authorization" is required and refers to
- 52.In "Stability information for the carriage of grain in bulk" the maximum heeling moment has dimension
- 53.Volume heeling moments in full hold with grain in bulk depend on the
- 54.A ship loaded with grain in bulk before departure must be
- 55.In the preparation of the cargo holds for loading grain in bulk bilge covers shall be covered with burlap to
- 56.For the carriage of grain in bulk minimum metacentric height is
- 57.For the carriage of grain in bulk the angle of heel due to the shift of grain shall not be grеater than
- 58.For the carriage of grain in bulk the residual area on the Reed's diagram must be a minimum of
- 59.For the carriage of grain by ship without the "Document of authorization" saucer is used to
- 60.For the carriage of grain by ship without Document of authorization heeling moment of partially filled compartment is
- 61.According to the Grain Code in "Information for sustainability" must have cross curves at 120. This is in order
- 62.The term "angle of flooding" used in the code for the carriage of grain in bulk means
- 63.Should be trimmed the grain in partly filled compartment with grain in bulk?
- 64.Assumed angles on the shifting of grain as requirements of the Grain Code IG for new ships is
- 65.Fixing the surface of grain in bulk with Saucer or Bundling
- 66.Requirements for Θst ≤ 12 º and residual area on the Reed's diagram S ≥ 0.075 m. rad are demonstrated
- 67.According to the map of zones and seasonal areas in the LL '66 Convention, Black Sea
- 68.According to the Convention LL'66 "Length between perpendiculars" is defined as
- 69.What ships are type А and type В according to the definitions in the Convention LL ' 66?
- 70.The term Allowance in the Convention LL' 66 is
- 71.International net tonnage of the vessel NT is determined on the basis of the volumes of
- 72.Is it possible BRT and GRT to be used instead of GT and NT ?
- 73.According to the CSS Code, the strengthening of steel coils by means of wedges is
- 74.According to the CSS Code, Calculation strength (CS) is
- 75.According to the CSS Code, the SAFETY FACTOR (SF) is
- 76.Seaway max
- 77.According to the Convention, LL ' 66 ships of type B-60 are
- 78.Break-bulk cargo ships
- 79.BLU Code is a code of IMO and refers to
- 80.Aerometer is an instrument designed to measure the
- 81.In accordance with the recommendation in the TDC Code metacentric height
- 82.IMSBC code Code goods are divided into three groups (A,B and C). What general properties do have loads in B and C?
- 83.Six digit code system to indicate the container cells in container ships, for example 01 03 02, means the number of
- 84.IMDG Code word "may" means that the provisions concerned are
- 85.Mate's receipt is signed
- 86."Special zones" in rule I-11 on MARPOL 73/78 means
- 87.The additional equipment for the protection of the crew, for the transport of dangerous goods, is regulated in
- 88.Is there a difference between Clean ballast tank (CBT) and Segregated ballast tank (SBT)?
- 89.Cargo information is required by
- 90.Cargo information, under SOLAS, Ch.VI, master should obtain from
- 91.Which Annex of MARPOL is concerned with oil and petroleum products?
- 92.Who is responsible for not violating the strength of the ship?
- 93.Who is responsible for completing the Declaration of Inspection before the start of the oil transfer in US ports?
- 94.Which Convention regulates the requirements for COW ( crude oil washing)?
- 95.Which Convention regulates the requirements for IGS (inert gas systems).
- 96.Can a ship's Agent be authorized to sign the Bill of lading for the loaded consignment, on behalf of the ship's captain?
- 97.In case of tankers Oil transfer in US ports, who can be placed in charge of this operation?
- 98.At what pressure should be tested elements of the system for petroleum operations (hoses, loading arms etc.) if the test must meet the requirements of the rules of the U.S. Coast Guard?
- 99.By the term "deratization" means the operation for
- 100.The content of the text - Marking of cargo (Standard shipping mark) is object of