F1 Navigation — Operational Level (OOW) — Page 4
554 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 301.Which of the following factors is the most crucial when determining the size of the dead zone of a radar?
- 302.Which of the following factors determines the size of the dead zone of a radar?
- 303.Which type of radar can activate SART?
- 304.The maximal distance of the radio-locatng visibility of the landmarks depends on:
- 305.At what distances can an activated transpoder with a radar be found?
- 306.At what distance from the centre of the screen will the accuracy of the measured radio-locatng bearing to the echo signal from the object be maximal?
- 307.The image on the radar during restricted visibility becomes better if which of the following is used?
- 308.You are sailing on course 30° and speed 11 knots. You discover on the radar on the starboard beam a target in a distance of 10 miles. What actions will you take?
- 309.When measuring with a radar of bearings and distances from a moving ship to a moving target it is determined that the vector of the relative speed of the target is twice smaller than the ship's speed and its direction is opposite of the ship's course. This means that:
- 310.When measuring with a radar of bearings and distances from a moving ship to a moving target it is determined that the vector of the relative speed of the target is twice smaller than the vector of the ship's speed and its direction is opposite of the ship's course. This means that:
- 311.When there is an indication on the screen of the radar from a signal from RACON, when the landmark is not observed yet, the distance is measured to:
- 312.When manoeuvring in restricted visibility with data only from the radar:
- 313.When determining the safe speed of ships equipped with radio-locatng stations, which of the following should additionally be taken into consideration?
- 314.With realtive motion, when the bearing and the distance to the target do not change, it means that:
- 315.When sailing in narrow channels the ship's radio-locating station is recommended to work in regime:
- 316.When sailing in restricted visibility due to heavy rain, the working range of the ship's radio-locating station can be deteriorated to:
- 317.During passing near a ship with a target with the help of ARPA, CPA (Closest Point of Approach) is called:
- 318.A radar working on a frequency 3 GHz, is:
- 319.A radar working on a frequency 9 GHz, is:
- 320.The radar is turned on in regime "ТМ". With some of the observed targets there are no trails. This means that:
- 321.After completion of the manoeuvre we notice that at one of the watched targets the bearing and distance have not changed. This means that:
- 322.According to the requirements of IMO Resolution A.953(23) Adopted on 5 December 2003, when a radio navigational system is used in open sea, the system must provide accuracy of the determined place not worse than:
- 323.Inmarsat-E EPIRBs have coverage and act in the region:
- 324.Is a collision possible between ships passing each other and there is a noticable changing of the bearing between them?
- 325.In order to undergo a manoeuvre for passing, it is necessary:
- 326.What maximal errors are admissible from АRPA in Dtarget, Ctarget and Vtarget after stable escort as per Resolution A.823(19)?
- 327.The image of АRPA is:
- 328.On the screen of ARPA one target is considered dangerous when:
- 329.Can RNC charts be used for voyage planning?
- 330.Can the voyage plan be made on ECDIS?
- 331.ECDIS must be able to store a record of the movement of the ship for the last:
- 332.The carriage of electronic charts on the ships is:
- 333.Is an automatic recording of the ship's course and passed distance possible?
- 334.Is making a change on a chart contents on the image of the raster navigational charts possible?
- 335.Is it posssible to combine the electronic chart image with the radar one?
- 336.The making of a turn automatically and standing on a new course is possibe:
- 337.The usage of the electronic charts is defined by the IMO as:
- 338.What is the difference between ENC and the other electronic charts?
- 339.What information must an ECDIS be able to store at one-minute intervals?
- 340.What are the consequences for the ECDIS system if the signal from the GPS stops?
- 341.What are the consequences, if differences in the geodetical datum, with which GPS and ECDIS operate, occur?
- 342.What does SENC mean with relation to electronic charts?
- 343.What does the abbreviation ENC mean?
- 344.What does the abbreviation RCDS mean?
- 345.What abbreviation has the IMO approved for describing chart information which needs to be loaded on an ECDIS
- 346.What is the minimal number of measurements from satellites needed for a GPS receiver in order to show exact three-dimensional position?
- 347.What window automatically appears on the display of ECDIS in order to alarm for a potential problem with the currently used chart image?
- 348.When does one ENC turn into SENC?
- 349.Which type of electronic charts is considered to present intelligent spacial data about the environment?
- 350.Which type of electronic charts present navigational information with higher accuracy?
- 351.How many "layers" of digital information can one raster chart show on the screen?
- 352.Controlling the movement of the ship can be done:
- 353.What is the type of memory used for storage of electronic navigational charts?
- 354.The highest level of navigational accuracy is achieved through:
- 355.Semi-automated correction of an electronic navigational chart can be done:
- 356.In electronic navagtional charts, how can automated correction of data be done?
- 357.When using which system for automated marine navigation, if needed can the marine navigator change the scale of the chart image?
- 358.Which type of system allows you to select the type of information shown on the screen?
- 359.When required the marine navigator can change the scale of the chart:
- 360.The raster navigational electronic charts (RNC) are created based on:
- 361.Resolution А 817(19) of IMO approves for navigation the following electronic charts:
- 362.Must the equipment for electronic charts be powered from an emergency source as well?
- 363.The whole navigational information from nautical publications can be re-created only in the system:
- 364.Using the keyboard on the computer, can correction be done by the person operating with the electronic charts?
- 365.The navigational planning of the voyage is possible:
- 366.The difference between the local "datum" and WGS-84 can be:
- 367.Additional emergency towing system is mandatory for tankers with DW:
- 368.Must the design, construction and tested prototype of the emergency towing system of the tankers be approved by the Administration?
- 369.If your ship has a fixed pitch propeller without reversable shaft and you are sailing full speed ahead, you can:
- 370.If your ship has a fixed pitch propeller you can:
- 371.If your ship has a fixed pitch propeller but with reversable shaft you can:
- 372.If your ships has a controllable pitch propeller you can:
- 373.In case of dangerous cargo fallen overboard what report must the captain send?
- 374.In a clear and warm weather and temperature of the water above 20°C in an abandon ship situation, which is not mandatory?
- 375.You are sailing close to shore when you are informed that the machine has stopped. A few hours are needed to deal with the problem. What will you do?
- 376.You are sailing in shallow waters with Under Keel Clearance equal to 15% of the draft. How will the ship's course change when sailing full speed astern form full speed ahead compared to that in deep waters?
- 377.You are sailing in shallow waters with Under Keel Clearance equal to 15% of the draft. How will the distance needed for stopping the ship change compared to that in deep waters?
- 378.You are sailing in shallow waters with Under Keel Clearance equal to 15% of the draft. How will the speed of the ship change when sailing full speed compared to that in deep waters?
- 379.You are adrift with a loaded VLCC in open seas. You have determined the course and speed of the drift. Can you do something in order to change the speed and direction of the drift of your ship?
- 380.You are adrift with a loaded VLCC and measure direction of the drift SSE. If the ship was in ballast condition, would the drift have the same direction?
- 381.The obligation for the ships to participate in the rеport system is based on:
- 382.Are the emergency towing system mandatory for tankers < 20 000 t.?
- 383.Why is it important to determine how the ship drifts during different weather conditions?
- 384.What kind of a hull shape does a ship usually have if she doesn't stay steadily on course?
- 385.What kind of a hull shape does a ship usually have if she stays steadily on course?
- 386.What does "Hard to Starboard" mean?
- 387.Which is the most typical for a ship which stays steadily on course?
- 388.Which of the statements is true for a ship that does not stay steadily on course
- 389.How many emergency towing devices must be mounted on the tankers?
- 390.Your ship runs aground in soft mud. You will have the best chance to get out if the ship has run aground during:
- 391.The list of the ship during a 180° turn:
- 392.The maximal diversion of the rudder is 35 degrees. Is this the maximal effective position of the rudder?
- 393.On the diagram it is shown that from full ahead to a stop, the distance is 2000m. What will the distance be for stopping in shallow waters?
- 394.The advance during circulation, the so-called “Advance”, is:
- 395.During swell, the length of the towing cable must be equal to:
- 396.When the vessel runs aground the captain immediately
- 397.During a fire on board a passenger ship, first:
- 398.When colliding with another ship, first:
- 399.Full technical speed of the ship is used:
- 400.Full technical speed of the ship is achieved: