F3 Control — Engineer Officer, Operational Level — Page 6
584 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 501.The maximum height at which the pilot must climb a pilot trap before reaching the deck or platform to stand on the gangway is:
- 502.Injuries due to slips and falls constitute the vast majority of incidents occurring in the department. What should be done to reduce the high percentage of these incidents ?
- 503.The noise level called "the injurious area", starting from
- 504.The equipment for pilots ladder and disembarking / embarking of a pilot should be supervised by :
- 505.What material should be made overalls ?
- 506.Where can you find the minimum requirements for the training of crew?
- 507.Pilot ladders shall have long steps to prevent twisting. The first long step should be 5 in a row from the beginning. At what intervals shall the other long steps be?
- 508.During mooring operations; what is the safest place ?
- 509.International Garbage Pollution Prevention Certificate is required for:
- 510.With Garbage Management Plan under MARPOL Annex V must be provide:
- 511.Garbage Management Plan should contain information on:
- 512.The availability of garbage comminuter must be documented in:
- 513.Garbage Record Book must be kept on ships which are:
- 514.In Garbage Record Book the following operations must be recorded:
- 515.Posters with an indication of the limitations of disposing of solid waste overboard required for:
- 516.Under the revised MARPOL Annex V (Resolution MEPC 201 . (62) ) shipping waste are divided into :
- 517.Under the revised MARPOL Annex V (Resolution MEPC 201 . (62) ) the following wastes are classified in different categories:
- 518.Special areas under MARPOL Annex V following seas :
- 519.Outside special areas the disposal of the following types of waste is permitted:
- 520.Is disposal of cooking oil in special areas permitted?
- 521.Requirements of MARPOL Annex V shall not apply to :
- 522.Where is the disposal of plastic waste permitted?
- 523.Disposal of carcasses of ships in a special area (special area):
- 524.Discharge of ground / shredded food waste from ships in special areas is allowed :
- 525.It is forbidden to discharge into the sea a mixture of :
- 526.A mixture of food waste and cooking fat can be thrown overboard :
- 527.With the revised MARPOL Annex V (Resolution MEPC 201 . (62) ) are introduced :
- 528.In special areas in MARPOL Annex V at a distance of more than 12 miles from the nearest coast the following types of waste are permited to be disposed:
- 529.Rules of Annex VI of MARPOL 73/78 relate to:
- 530.Annex VI of MARPOL 73/78 applies to:
- 531.Sea areas in which control SOx emissions, (ECA-SOx) are:
- 532.In the region of North America, Annex VI of MARPOL 73/78 imposes stringent requirements on ships, in terms of:
- 533.Annex VI of MARPOL 73/78 requires the keeping of:
- 534.The maximum permissible sulphur content of fuels on board ships sailing in the Baltic Sea should not exceed:
- 535.Ships sailing in the Black Sea should use fuels with maximum sulphur content :
- 536.Ships staying in Bulgarian ports are not permitted to use fuel with sulphur content exceeding :
- 537.Operations for supplying the ship with refrigerants are recorded in :
- 538.Management plan for the volatile organic compounds are required for the following types of ships :
- 539.Chapter 4 of Annex VI of MARPOL 73/78 applies to :
- 540.Rules for energy efficiency of shipping entered into force on :
- 541.EEDI abbreviation means:
- 542."Attained EEDI" is:
- 543.In what units is the constructive energy efficiency index calculated?
- 544.Energy efficiency rules do not apply to:
- 545.International Certificate of energy efficiency required under the rules:
- 546.With respect to "existing ships" (existing ships) Chapter 4 of Annex VI of MARPOL 73/78 requires:
- 547.Ships within the scope of Annex VI of MARPOL 73/78 must have:
- 548.Constructive energy efficiency index is calculated for:
- 549.Under what legal document is required specialized training for teamwork and leadership skills?
- 550.The main elements of mechanical control are:
- 551.The main elements of dynamic management are:
- 552."Wheel" management begins with:
- 553."Wheel" management ends with:
- 554.Authoritarian leader is primarily concerned with:
- 555.Social type of leader is primarily concerned with:
- 556.Organizing type of leader is primarily concerned with:
- 557.X style of management means:
- 558.Y-style management means:
- 559.When setting goals we start with:
- 560.In the stage of forming the team people are:
- 561.In the stage of experimentation crew tend to:
- 562.In the stage of consolidating crew tend to:
- 563.The mature team is characterized by:
- 564.The "Plant" role model is the most suitable in:
- 565.The "Resource Investigator" role model is the most suitable in:
- 566.The "monitor/evaluator" role model is the most suitable in:
- 567.The "coordinator" role model is the most suitable in:
- 568.The "shaper" role model is the most suitable in:
- 569.The "team worker" role model is the most suitable in:
- 570.The "implementer" role model is the most suitable in:
- 571.The completer / finisher role model is the most suitable for:
- 572.The" Specialist" role model is most appropriate when:
- 573.The main motive for carrying out a particular activity:
- 574.In meeting the needs of the highest priority are:
- 575.Communication's highest priority is:
- 576.The first stage of the development team requires clarification of:
- 577.The stage of resolving internal conflicts within the team suggests:
- 578.Cultural shock to many national companies is caused by:
- 579.Group norms of the formed teams of the bridge are:
- 580.Which of the following conditions contribute most fully to building an effective team?
- 581.The most favorable among those conditions for deciding on teamwork.
- 582.Conflict resolution is a way to:
- 583.Basic skills that the team must master include:
- 584.If disputes arise in various management alternatives, the team must: