F2 Cargo handling — Officer of the Watch (CMKE, Poland)
91 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 1.The figure below presents:
- 2.The figure presents a section of a double bottom. Select a sentence which is false:
- 3.The figure presents a section of a double bottom. Select a sentence which is false:
- 4.The figure presents a transverse cross-section through the main deck. Stringer plate thickness equals:
- 5.The figure presents a transverse cross-section through the main deck. Which of the following sentences is false:
- 6.Look at the drawing. Which of the sentences is false:
- 7.The drawing presents a functional division of a container ship. FEU may be loaded on the deck in:
- 8.The figure below presents the hull in:
- 9.The maximum allowed ship draft is determined by:
- 10.Shearing forces and bending moments are calculated using a loading calculator, provided that:
- 11.Shearing forces and bending moments are controlled:
- 12.The range and size of anchoring equipment is determined based on:
- 13.A swivel is a chain link in:
- 14.Lifting capacity of twin derricks equals:
- 15.Hold covers that close the cargo holds shall be compliant with the following requirements of:
- 16.In parallel operation of derrick jibs:
- 17.A crane handling device for holding and moving a load without a system of blocks fastened outside the perimeter of its own structure is a:
- 18.Wight cargo runner is a line for:
- 19.A pipe through which the cable goes from the anchor winch to the anchor cable locker is called:
- 20.The permitted load of the lifted cargo with the mass of the auxiliary gear used to lash the cargo is:
- 21.Stern door shall be compliant with the requirements of:
- 22.When the density of sea water changes, there may also be a change of:
- 23.The main part of the correction for free liquid surfaces depends on the horizontal dimensions of the tank surface area and on:
- 24.It is assumed that the centre of gravity of a shipping container lifted with a heavy derrick boom (hoisting) is located:
- 25.Stability test is used to determine:
- 26.When determining a weather criterion acc. to IMO we take into account:
- 27.If a transverse wind pressure causes static list of the ship, then:
- 28.The ship has a buoyancy of 10000 t, the corrected metacentric height is 0.50 m. The weight of 50 t is shifted by the distance of 10 m to starboard side. The angle of heel is approx.:
- 29.How many tons of ballast water should be transferred from the stern tank to the forward tank for a distance of 50 m to correct the trim? Stern draft 4.5 m, forward draft 3.9 m, moment to alter trim 15000 Tm/m.
- 30.A heel of 12 degrees in a stability criterion in terms of loading grain refers to:
- 31.Loss of stability is:
- 32.Water tight door during a sea voyage:
- 33.Flooding factor is:
- 34.The angle of flooding is a static heeling angle; when it is exceeded:
- 35.Which figure is not a stability criterion:
- 36.To confirm whether a ship fulfils the stability requirements for departure, we use:
- 37.Blows delivered by the sea to a vessel in motion. is called:
- 38.The period of ship’s free oscillation depends on:
- 39.The unit determining the size of a container ship is:
- 40.The dimensions (length x width x height) of a standard container of Class 1AA are:
- 41.According to the International Class Dangerous Goods Code, Class 6 means:
- 42.One foot equals:
- 43.Compared to the ISO pallet, the EURO pallet (length x width) is:
- 44.40’HC (high cubes) refers to a container:
- 45.Bay defines:
- 46.Tier defines:
- 47.Row defines:
- 48.The container is on board when the tier:
- 49.A ‘gooseneck’ is a device:
- 50.0.1 m3 equals to:
- 51.On the stowage plan, 20’ containers can be identified by:
- 52.The IMDG Code uses the division of dangerous goods into:
- 53.Cargo marked as ‘marine pollutant’:
- 54.Dunnage means materials that are used to secure cargo against:
- 55.A roll-trailer is:
- 56.One of the characteristics of a crude oil tanker is:
- 57.The loading order on a container ship depends on:
- 58.The coding of the container position on a container ship is:
- 59.The IMDG Code applies to:
- 60.The IMSBC Code applies to:
- 61.The International Maritime Solid Bulk Cargoes – IMSBC:
- 62.The illustration presents:
- 63.The document confirming the carriage of dangerous cargoes is:
- 64.During loading, the watchkeeping officer does not check containers for:
- 65.Each package with dangerous goods should be marked, indicating:
- 66.The ignition temperature is:
- 67.The stowage factor specifies:
- 68.Grain includes:
- 69.A closed room refers to:
- 70.In accordance with the requirements of IMO/Res.1050 of 2011, entry into confined spaces is permitted at an oxygen content of:
- 71.Fresh Water Allowance – FWA – means:
- 72.Crude oil washing – COW – is a system:
- 73.The 1AA designation applies to:
- 74.A package is a cargo unit created:
- 75.Cargo is:
- 76.The Code of Safe Practice for Cargo Stowage and Securing is:
- 77.An in-house pallet is a pallet:
- 78.During cargo operations, when it is necessary to protect the cargo from rain, the order to close the cargo hatch covers is issued by:
- 79.The FAL Convention applies to:
- 80.A submersible cargo pump on the tanker means a pump:
- 81.LPG means:
- 82.The use of a breathing apparatus in confined spaces is:
- 83.The transhipment rate determines:
- 84.Fumigation is:
- 85.Damage to a ship or cargo that may occur during cargo operations should be reported:
- 86.On ships such as container ships, reefer ships, ro-ro ships or car carriers – a sufficient amount of cargo securing equipment should be ensured by:
- 87.Before commencing the loading, the cargo officer:
- 88.The standard of preparing the hold for a given load, including the method of cleaning and recommended measures, is specified by:
- 89.During cargo operations, the preparation of the hatch covers to be taken off or the handling of the cargo covers is at the discretion of:
- 90.Inert gas may not contain:
- 91.FPSO is: