F1 Navigation — Officer of the Watch (CMKE, Poland) — Page 2
564 questions with correct answers. Click a question to see its answer.
Take the full test →Random exam test generator, free, no registration- 101.The beam position is set by a perpendicular line starting from the object towards:
- 102.If TC = 100°, wind ENE, CTW = 110°, the:
- 103.3rd problem of sailing on a current makes it possible to check the actual value of the current that acted during the previous section of sailing (e.g. in the last hour). The officer of the watch should compare:
- 104.Correction for current is the angle between:
- 105.Correction for wind or for leeway:
- 106.The minimum actual distance from which we miss an object will take place at the position of intersection:
- 107.In order to determine the position from two simultaneous position lines:
- 108.When the horizontal angle at which two objects are seen equals 90˚:
- 109.In practice, measurement of a vertical or horizontal angle may be made using:
- 110.Measurement of distances to two objects will make it possible to determine:
- 111.When sailing a ship in a restricted area basin you identify a floating navigational aid, you should make the following assumption:
- 112.Which property of a position line (understood as an isoline) is true:
- 113.The substance of determining the position from two non-simultaneous position lines involves:
- 114.The observed position makes it possible to control the deviation value, provided that:
- 115.If a horizontal angle measured between 2 objects α is smaller than 90°, in order to determine the position line, the auxiliary angle γ is reproduced from the baseline:
- 116.If a horizontal angle measured between 2 objects α is greater than 90°, in order to determine the position line, the auxiliary angle γ is reproduced from the baseline:
- 117.Bearings for a navigational aid changes more quickly as:
- 118.The probability of finding actual ship position inside an area of a calculated circle error is:
- 119.Height of tide means water elevation above:
- 120.Impact of tide generating forces causes tides, understood as:
- 121.Tidal range is understood as:
- 122.Water depth written on a map is understood as:
- 123.Tidal waters. A depth of an approach fairway equals 12.6 m, ship draft equals 13.6 m, the required under-keel allowance for ship approach to the shore is 2 m. Is it possible for the ship to enter the port?
- 124.Tidal waters. A vertical clearance of a bridge indicated in the map equals 27 m above MHWS. Ship with a draft of 13 m approaches the port. What will be the time at which the ship will be able to pass under the bridge, if the side height of the ship equals 42 m.
- 125.When during a tidal day two consecutive high waters or two subsequent low waters have negligible differences, the tide that occurs is named:
- 126.When during a tidal day two consecutive high waters or two subsequent low waters have significant differences, the tide that occurs is named:
- 127.Ship speed through water = 10 knots, speed over the ground = 10 knots Determine the value of tidal stream:
- 128.Publication of the British Admiralty that presents daily tide forecasts for standard ports is:
- 129.In nautical charts of certain basins, values of tidal streams are presented in tidal stream value tables. In order to calculate a forecast for currents for the position where the watch is started and for the next hours of navigational watch, the following should be checked:
- 130.In order to provide tide and tide stream forecast in the summer period on the basis of tide tables:
- 131.Slack water is a characteristic feature of:
- 132.In European basins the most predominant type of tides is:
- 133.Neap tide occurs when:
- 134.Spring tide occurs when:
- 135.Spring tides are characterised by:
- 136.For tidal waters, in nautical charts the shoreline generally indicates:
- 137.Neap tides are characterised by:
- 138.A chart datum is:
- 139.Pilot charts (routeing charts) do not include information on:
- 140.An interval between successive high waters or between successive low waters is called:
- 141.Tidal range is understood as:
- 142.Tidal stream direction is understood as:
- 143.Chart datum in tidal basins is determined:
- 144.Water depth indicated in a map is understood as:
- 145.If there is one high water and one low water present during a single lunar day, we call the tide:
- 146.In maps of tidal waters, the reference level of the heights of land structures, clearances, height of light sources etc. is:
- 147.Negative tide value means that depth in the basin is:
- 148.When there is summer daylight savings time in the port, in order to calculate the time of occurrence of tides and tidal streams:
- 149.Spring tide occurs when:
- 150.A tide is called diurnal if:
- 151.Duration of rising or falling tide is:
- 152.Distance between the water surface and the level of reference for tides (tidal datum) means:
- 153.In the Tide Table of the British Admiralty, the tide forecast for secondary ports is provided in a form of:
- 154.In the Tide tables of the British Admiralty, a group of secondary ports is assigned to a main (standard) port which:
- 155.Storm surges are waves generated by the impact of:
- 156.Negative surges are local drops in sea level caused by:
- 157.A celestial meridian is:
- 158.Celestial body azimuth in a semi circular system is calculated from:
- 159.Polar altitude is:
- 160.At which moment the vertices of a spherical parallactic triangle are located in the same great circle:
- 161.Universal time is calculated from the moment:
- 162.Chronometer status is:
- 163.Apparent height of a celestial body is a:
- 164.Radius of an astronomical position circle equals:
- 165.In order to identify the name of a celestial body, it is necessary to know its:
- 166.When the observer, while measuring the altitude of a celestial body simultaneously receives the coordinates of one’s own observed position:
- 167.A celestial body culminates in a zenith provided:
- 168.Location of a celestial body projection to the surface of the earth equals:
- 169.Radius of an astronomical position circle equals:
- 170.The latitude method can be used when the observed celestial body is:
- 171.The longitude method can be used when the observed celestial body is:
- 172.In order to calculate total correction of a magnetic compass, we use celestial bodies the altitude of which is:
- 173.For a celestial body to be a circumpolar one, the following conditions need to be fulfilled:
- 174.Observer’s position has no impact on the following astronomic coordinates:
- 175.Full course of the Moon around its orbit in relation to the sun is called:
- 176.Time between total observations when determining OP from two non-simultaneous observations of celestial bodies is:
- 177.A sailing plan should be prepared and approved:
- 178.A person responsible for drafting the sailing plan is:
- 179.Parallel Indexing technique should be used to:
- 180.Movement of a sailing plan from a map or a navigational system to another navigational system may take place if:
- 181.A mandatory part of the sailing plan is not:
- 182.“Information Exchange Form” is:
- 183.In case there are any doubts as to the position or the manner of sailing, the watch officer:
- 184.The main purpose of a Vessel Traffic System (VTS) is:
- 185.If autopilot is used, manual control should be checked:
- 186.Planning the journey consists of the following 4 stages:
- 187.The sailing plan must be drafted for the relation:
- 188.In accordance with the requirements of the SOLAS convention, a ship should have the following for a planned trip:
- 189.In the planning process, the following should be marked on maps:
- 190.The “Routeing chart” publication does not include:
- 191.ECDIS systems may work in the following modes:
- 192.Which from the information groups below do not have to be presented in ECDIS:
- 193.A database originating from an ENC map, layers of map corrections and additional information added by the operator is called:
- 194.The ECDIS system should register a set of data in its memory necessary to restore the navigation course in one minute intervals and check the official database used in the course of the previous 12 hours. Additionally, it should record all route of the current journey passed so far along with time markers in time intervals not exceeding:
- 195.If the operator did not choose a safe isobath, as a default the ECDIS system should assume it at the level of:
- 196.The ECDIS system should log the passed route in one minute intervals (time, location, course and speed) as well as data used (source, edition, date, ENC unit and update history) in order to restore the course of navigation and check the official database used within the last:
- 197.SENC display category launched with a single action of the operator acc. to MSC.232(82) resolution is:
- 198.Display shown in the ECDIS screen from which no element may be removed is:
- 199.When there is no isobath declared by the operator as a safe isobath in the SENC database, the system chooses:
- 200.ECDIS must present the following information: